Oms, I also use DX4Win with a 7800, and when operating split my transmit frequency (SUB VFO) is recorded in the DX4Win "FREQ" field and my receive frequency (MAIN VFO) is recorded in the "Notes for the QSO" field. With the >File >Preferences >Radio definition set for the radio with version 2.30 of the Icom microcode, the MAIN and SUB VFOs flicker every two seconds (the default polling rate of DX4Win), because the software selects SUB, reads the SUB frequency and mode, then re-selects MAIN.
>"difficult to have the sub VFO capturing... " What type of problem are you having? Is the log showing incorrect frequencies or modes? As a test: 1. Open >Radio >Set Frequency 2. Press the <F9> key so that DX4Win begins constant (2 second) polling of the radio 3. Watch the frequencies in the Set Frequency window If the VFO frequencies "jump around", then your CI-V packets between radio-and-PC are getting corrupted. Something is wrong with your CIV bus. Hope this helps, -larry (K8UT) -----Original Message----- From: py5eg Sent: Wednesday, April 04, 2012 5:06 PM To: Jim Reisert AD1C ; REFLECTOR dx4win Subject: [Dx4win] IC 7800 WITH DX4WIN Hi folks I do have a IC7800 and I´m facing difficult to have the sub VFO capturing by the DX4WIN I kindly ask some information about it. Best 73 Oms PY5EG ______________________________________________________________ DX4WIN mailing list Home: http://mailman.qth.net/mailman/listinfo/dx4win Help: http://mailman.qth.net/mmfaq.htm Post: mailto:DX4WIN@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html ______________________________________________________________ DX4WIN mailing list Home: http://mailman.qth.net/mailman/listinfo/dx4win Help: http://mailman.qth.net/mmfaq.htm Post: mailto:DX4WIN@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
