Jim, I can rename the FTDX5000 to FTDX3000 and send to you, But that doesn´t change the fact if you double click on a spot With SPLIT that THE MODE in VFOB is not correct.
There is no mode cmd for a second VFO available because there is no Second VFO in the FTDX3000 its only a second stack >From my previous posting MODE command Cat manual page 12 FTDX5000 shows P1 0: main (VFO-A) P1:1: sub (VFO-B) FTDX5000 cmd = MD0; = in this case reads mode from VFO-A FTDX5000 cmd = MD1; = in this case reads mode from VFO-B For setting the modes on FTDX5000 its something similar FTDX5000 cmd = MD01; = in this case sets mode from VFO-A to LSB FTDX5000 cmd = MD11; = in this case sets mode from VFO-B to LSB First number is for the VFO selection and second number(or letter not yet supported by dx4win) for the mode. Page 11 from the FTDX 3000 CAT manual shows now a BIG PROBLEM P1 = 0:fixed Yaesu claims now also like Icom is doing over the years that there are not 2 VFO´s Because there are not 2 receivers but only one inside the radio for them its only a second VFO A with different stack and not a real VFO B Maybe with the cmd AB --> VFO A to VFO´A´(vfoB) it could work but Need a radio here to test that out before any release Guy -----Oorspronkelijk bericht----- Van: jjreis...@gmail.com [mailto:jjreis...@gmail.com] Namens Jim Reisert AD1C Verzonden: maandag 8 april 2013 15:55 Aan: ON4AOI CC: j...@w9rpm.com; DX4WIN Reflector Onderwerp: Re: [Dx4win] support for the new Kenwood TS-990 On Sun, Apr 7, 2013 at 10:31 PM, ON4AOI <on4...@skynet.be> wrote: > There can´t be any support for the FT3000 rig file Not from me or Paul > or anyone else. > > YAESU left OUT the cat commands for VFO-B and related Mode So as long > there are no commands in the ft3000 firmware It is impossible So why can't there be a driver that treats the radio like it only has one VFO? The ability to read the current VFO and assume simplex operation is better than nothing, right? -- Jim Reisert AD1C, <jjreis...@alum.mit.edu>, http://www.ad1c.us ______________________________________________________________ DX4WIN mailing list Home: http://mailman.qth.net/mailman/listinfo/dx4win Help: http://mailman.qth.net/mmfaq.htm Post: mailto:DX4WIN@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
