Hi Randy,
OK, LPT3 is installed and has a non standard address of 49168 Dec, or c010
Hex. It works fine with DDUtil. DX4WIN will not let me enter LPT3. I went
to the .INI file and added the dec and Hex address to the file for LPT3 as
directed in the Help files but no joy....
-----Original Message-----
From: Randy Farmer
Sent: Friday, May 30, 2014 8:50 PM
To: dx4win@mailman.qth.net
Subject: Re: [Dx4win] DX4WIN Band Decoder not responding
Is the LPT driver installed? You have to do that at install time to make
the port work.
73...
Randy, W8FN
On 5/30/2014 10:08 AM, Dennis Petrich wrote:
Hi guys,
I am trying to setup the "Band Decoder" window in File/Preferences/Control
but none of the items in that window, Type, LPT Port or Active band, will
let me click and enter anything...
Right now, type has None, LPT Port has LPT1 and Active Bands has 160m-10m.
I'm running 8.05...
Would appreciate any help from the users! I went to the HELP files but it
didn't seem to cover this issue....
Dennis, k0eoo
______________________________________________________________
DX4WIN mailing list
Home: http://mailman.qth.net/mailman/listinfo/dx4win
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:DX4WIN@mailman.qth.net
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
______________________________________________________________
DX4WIN mailing list
Home: http://mailman.qth.net/mailman/listinfo/dx4win
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:DX4WIN@mailman.qth.net
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
