Hello Eric, I don't own that printer, but possible there is a margin setting in the printer driver. Check the printer properties.
73, Jesse, KA8YYZ --- ericrosenberg...@gmail.com wrote: From: Eric Rosenberg <ericrosenberg...@gmail.com> To: DX4Win Reflector <dx4win@mailman.qth.net> Subject: [Dx4win] Brother DK-1209 Label Problem Date: Wed, 30 Dec 2015 23:21:38 -0500 I've started using a Brother one-label-at-a-time label maker, the QL-550, with DX4Win v8.05 It's a very nice printer, and much easier to deal with than a conventional printer and sheets of labels. I first started out using DK-1201 labels, which are 1.1" x 3.5" (28.9mm x 90.3mm) which were fine other than that each label had to be trimmed as they are wider than the space on my card. I then tried the DK-1209 label, which is 1.1" x 2.4" (28.9mm x 62mm). For some reason I cannot explain or figure out how to cure, the printable space in height is less than with the 1201 label, which is the same size. I've tried adjusting all of the tweakable parameters in DX4Win, but can't expand that space. Can anyone help? Thanks, 73 & Happy New Year! Eric W3DQ ______________________________________________________________ DX4WIN mailing list Home: http://mailman.qth.net/mailman/listinfo/dx4win Help: http://mailman.qth.net/mmfaq.htm Post: mailto:DX4WIN@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html _____________________________________________________________ Netscape. Just the Net You Need. ______________________________________________________________ DX4WIN mailing list Home: http://mailman.qth.net/mailman/listinfo/dx4win Help: http://mailman.qth.net/mmfaq.htm Post: mailto:DX4WIN@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html