See my notes here
http://www.qsl.net/sv1dpi/en/dx4win/printqsos.html
...73 de SV1DPI
(One of SZ1A-EP6T)
On 21/3/2016 3:33 πμ, John Shaw wrote:
I have done this. Not sure if this is the best way but here is what I did.
I made a custom label the size of the card with nr across 1 nr down 1 Paper
size Custom then adjusted the left and top spacing to put the printing where
I wanted it. It actually worked quite well with an ink jet, BUT.
A couple of thoughts on consumer grade printers. Ink jet printing is
hopeless if it gets wet and I have had people request a replacement card
because the postie dropped the letter in a puddle or something. Laser
printers don't print very well on heavy card just not enough heat to fuse
the toner properly, yes some have a setting for heavier paper. I'll let
others decide if their laser fuses the toner good enough but I have gone
back to labels and a laser printer.
73 John ZL1BYZ.
-----Original Message-----
From: DX4WIN [mailto:dx4win-boun...@mailman.qth.net] On Behalf Of William
Liporace
Sent: Monday, 21 March 2016 14:01
To: Dan Violette; 'DX4WIN POSTINGS'
Subject: Re: [Dx4win] Print QSL Cards
I was hoping to print directly on the back of my pre printed QSL cards...
This is my third call. I have three different cards (and styles). I can do
labels for the other other two. My current printer is a Brother HL-5250. I
also have a HP OfficeJet Pro 8610, but that has not as easy to setup (as I
can tell).
TNX Will WC2L
On 3/20/2016 8:46 PM, Dan Violette wrote:
Will, Is this preprinted cards and you want to go in a blank spot
instead of sticking on a label (that is what I do)? What printer do you
expect to use?
This will all help for replies since everyone is in a different
situation and lots of customizing needed. Dan KI6X
-----Original Message-----
From: DX4WIN [mailto:dx4win-boun...@mailman.qth.net] On Behalf Of
William Liporace
Sent: Sunday, March 20, 2016 5:07 PM
To: DX4WIN POSTINGS
Subject: [Dx4win] Print QSL Cards
I was looking at testing printing directly to QSL cards. I am using
typical QSL card stock that is 3.5x5.5. Can someone tell me how to get
DX4WIN to print directly on the cards??
TNX Will
--
William Liporace WC2L
http://www.wc2l.com or http://dxc.wc2l.com AR-Cluster Node telnet
dxc.wc2l.com or 144.93 MHz w...@wc2l.com
______________________________________________________________
DX4WIN mailing list
Home: http://mailman.qth.net/mailman/listinfo/dx4win
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:DX4WIN@mailman.qth.net
This list hosted by: http://www.qsl.net Please help support this email
list: http://www.qsl.net/donate.html
--
William Liporace WC2L
http://www.wc2l.com or http://dxc.wc2l.com AR-Cluster Node telnet
dxc.wc2l.com or 144.93 MHz w...@wc2l.com
______________________________________________________________
DX4WIN mailing list
Home: http://mailman.qth.net/mailman/listinfo/dx4win
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:DX4WIN@mailman.qth.net
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
______________________________________________________________
DX4WIN mailing list
Home: http://mailman.qth.net/mailman/listinfo/dx4win
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:DX4WIN@mailman.qth.net
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
______________________________________________________________
DX4WIN mailing list
Home: http://mailman.qth.net/mailman/listinfo/dx4win
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:DX4WIN@mailman.qth.net
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
