John, In my case, I am using RemoteRig boxes at both the remote and control sites. I have a Static IP at the remote site and I forward two or three ports that the two boxes use to communicate. I am not sure if I prioritized the port connections in the routers at each end. Will have to check. No, I do not have Wifi cameras and other equipment actively engaged at either end. No Wifi mouses/keyboard. (I use Bluetooth.) Not sure what you mean by backhaul distance. The remote site is about 10 miles from my home (control site). Latency is normally not an issue. I regularly operate major contests with full control of the remote K3 and all accessories. Audio streaming is normally excellent.
Dave, N4QS -----Original Message----- From: dx4win-boun...@mailman.qth.net [mailto:dx4win-boun...@mailman.qth.net] On Behalf Of John pritt Sent: Tuesday, February 20, 2018 7:39 AM To: Kostas SV1DPI <sv1...@otenet.gr> Cc: dx4win@mailman.qth.net Subject: Re: [Dx4win] DX4Win - Elecraft K3 - Remote Rig Interesting problem. Are either of you using a Static or Dynamic IP? Also, have you prioritized this port connection in your router? Is there other router activity going on in your home like WiFi cameras, IP phones and WiFi mouse/keyboard and such? What is the back haul distance between remote and ham equipment John Pritt > On Feb 20, 2018, at 00:35, Kostas SV1DPI <sv1...@otenet.gr> wrote: > > I use a Kenwood 480 with remoterig and happens to me also. I believe the > problem is that when dx4win looses cat control, deactivate the cat control > (com port). Cat control via internet looses some packets from time to time. > Dx4win thinks that lost the cm port and deactivate it. > > I use the same setup with writelog also. When writelog looses the cat control > the freq freezes, writelog continues to work and after some seconds finds > again the radio. > > Some others users complain about the same: Dx4win pop up a message every time > it looses the CAT control - com port. Writelog behaviour would be much better > to have. > > ...73 de Kostas SV1DPI > (One of SZ1A-EP6T) > > Στις 18/2/2018 3:10 πμ, ο John, K9EL έγραψε: >> I am using a K3/0 remote over the Internet to a K3. DX4Win keeps losing >> the connection to the K3/0 on my laptop. Sometimes it stays connected for >> 20 minutes, sometimes an hour. I cannot figure out what is going on. The >> laptop is connected to the Remote Rig box via USB. >> >> >> Just wondering if anyone ever had an issue with staying connected to >> Remote Rig boxes. >> >> >> 73, John K9EL >> >> >> ______________________________________________________________ >> DX4WIN mailing list >> Home: http://mailman.qth.net/mailman/listinfo/dx4win >> Help: http://mailman.qth.net/mmfaq.htm >> Post: mailto:DX4WIN@mailman.qth.net >> Message delivered to sv1...@otenet.gr >> >> This list hosted by: http://www.qsl.net Please help support this >> email list: http://www.qsl.net/donate.html > > ______________________________________________________________ > DX4WIN mailing list > Home: http://mailman.qth.net/mailman/listinfo/dx4win > Help: http://mailman.qth.net/mmfaq.htm > Post: mailto:DX4WIN@mailman.qth.net > Message delivered to radiot...@nycap.rr.com > > This list hosted by: http://www.qsl.net Please help support this email > list: http://www.qsl.net/donate.html ______________________________________________________________ DX4WIN mailing list Home: http://mailman.qth.net/mailman/listinfo/dx4win Help: http://mailman.qth.net/mmfaq.htm Post: mailto:DX4WIN@mailman.qth.net Message delivered to n...@vci.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html ______________________________________________________________ DX4WIN mailing list Home: http://mailman.qth.net/mailman/listinfo/dx4win Help: http://mailman.qth.net/mmfaq.htm Post: mailto:DX4WIN@mailman.qth.net Message delivered to arch...@mail-archive.com This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html