On Sat, 15 Dec 2018 15:32:48 -0800, Mark Weiss via DX4WIN <dx4win@mailman.qth.net> wrote:
>I've used DX4WIN for many years. It controls my IC-7800 perfectly, as >expected. > >Now I'd like to also be able to control my transceiver by WSJT-X, as well. > >The problem is that they both fight for control of the rig. DX4WIN usually >wins and WSJT-X presents me with an error message. > >Does anyone have a simple way to enable both programs to control the rig >concurrently? > >Tnx & 73, > >Mark, K6FG For many years I ran this program to 'split' the COM port to two programs that needed rig control. It worked fantastic! The 32 bit version is free. http://www.eterlogic.com/Products.VSPE.html I later got a Microham MK2+. Its router software has that capability built in so I didn't need VSPE anymore. Good luck! 73 Al N9ISN -- Allan W. Schlaugat Albertville, WI USA Amateur Radio: N9ISN Home Page: www.n9isn.com American Philatelic Society #186089 I believe in sharing the road with other drivers. They can have the part behind me. ______________________________________________________________ DX4WIN mailing list Home: http://mailman.qth.net/mailman/listinfo/dx4win Help: http://mailman.qth.net/mmfaq.htm Post: mailto:DX4WIN@mailman.qth.net Message delivered to arch...@mail-archive.com This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html