Hi, In my DX4WIN I have different Group numbers allocated for my Home and Portable operations. During these operations I open DX4WIN and enter the group number related to my current Home or Portable location, and only then I start logging my QSOs, and all is OK. BUT: I have created different WSJTX instances with different FT8 logs, each one related to my different QRA locator. They are stored in different folders, so when importing them, I'd like that each of them gets logged in DX4WIN under the related Group name used for this location. When importing Home FT8 QSOs log, I selected Group 1 and the log contacts now appear in my Home Group1 window.Then, before importing the FT8 log made on one of my portable locations, I have set DX4WIN window to Group 2. After importing FT8 log, I found it's QSO-s appear under Group 1 !??? 1. Am I missing something during the import procedure? How to get them allocated to the Group2 during Import? 2. Once they were imported and appear in the Goup1, how to move them to a group 2 ??? I have sent this question to the Reflector, but it was rejected because I enclosed some screen shots that number of bytes exceeded the number allowed by the Reflector. 73, Radi f6gnz
______________________________________________________________ DX4WIN mailing list Home: http://mailman.qth.net/mailman/listinfo/dx4win Help: http://mailman.qth.net/mmfaq.htm Post: mailto:DX4WIN@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html