Joe, Rigfiles have never been updated via that way You should check the link below
https://ad1c.us/dx4win/ Guy ON4AOI - OT7K -----Original Message----- From: k...@comcast.net <k...@comcast.net> Sent: Friday, October 21, 2022 5:41 PM To: 'ON4AOI' <on4...@skynet.be> Subject: RE: [Dx4win] Trouble getting Icom 7610 recognized I'm running 9.0.9.1259 and ran Help>Check for Updates, which I do regularly. Is there some other file? 73, Joe KQ3F -----Original Message----- From: ON4AOI <on4...@skynet.be> Sent: Friday, October 21, 2022 11:33 AM To: k...@comcast.net; dx4win@mailman.qth.net Subject: RE: [Dx4win] Trouble getting Icom 7610 recognized Did you download the latest file from Jim his page ? -----Original Message----- From: dx4win-boun...@mailman.qth.net <dx4win-boun...@mailman.qth.net> On Behalf Of k...@comcast.net Sent: Friday, October 21, 2022 5:12 PM To: dx4win@mailman.qth.net Subject: Re: [Dx4win] Trouble getting Icom 7610 recognized I've been away from home for a bit and would like to put this up again. Here's the situation: DX4Win doesn't seem to recognize my Icom 7610's frequency and mode, giving me a "Radio timed out. Radio interface has been disabled" message. But N1MM+ and WSJT work just fine. And my second radio, an Icom 7600, also works just fine when I select Radio 2 (the 7610 is radio 1). So it's something between the 7610 and DX4Win. But what? Rebooting doesn't seem to make any difference. I can go from N1MM+ to WSJT and back to N1MM+, so it doesn't appear to be a port hogging issue. If it didn't work with other software then I'd have some idea where to look. I'm just not sure what, if anything, changed on my end. I've tried various settings, carefully noting the changes I made, but still nothing. Thanks to those who've offered suggestions, just thought I'd reup it. I'm sure it's something silly or dumb, but I don't know how silly or how dumb. 73, Joe KQ3F -----Original Message----- From: dx4win-boun...@mailman.qth.net <dx4win-boun...@mailman.qth.net> On Behalf Of k...@comcast.net Sent: Monday, September 26, 2022 9:36 AM To: dx4win@mailman.qth.net Subject: [Dx4win] Trouble getting Icom 7610 recognized Hello all! Somehow DX4Win is no longer recognizing my Icom 7610, which it used to do with no problem. Oddly, N1MM+ recognizes it just fine. Even more oddly, I have an Icom 7600 as a second radio and DX4Win recognizes that one as well. Here are my settings: Type: ICOM 7610_500Hz-V7 Address: 98H Baud: 9600 COM Port: COM5 (same as N1MM+) Poll rate: 5000 DTR/RTS both NOT checked I have similar settings for the Icom 7600 only 7AH for the address and COM3. Works fine. So I'm stumped. Any idea welcome. It must be something simple (and dumb, on my part). Thanks! 73, Joe KQ3F ______________________________________________________________ DX4WIN mailing list Home: http://mailman.qth.net/mailman/listinfo/dx4win Help: http://mailman.qth.net/mmfaq.htm Post: mailto:DX4WIN@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html ______________________________________________________________ DX4WIN mailing list Home: http://mailman.qth.net/mailman/listinfo/dx4win Help: http://mailman.qth.net/mmfaq.htm Post: mailto:DX4WIN@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html ______________________________________________________________ DX4WIN mailing list Home: http://mailman.qth.net/mailman/listinfo/dx4win Help: http://mailman.qth.net/mmfaq.htm Post: mailto:DX4WIN@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
