Hello, everyone. I'm having trouble using DX4WIN connected to the IC-7300. In my case, I use the Eterlogic VSP software, and what I find strange is that the main frequency is being read incorrectly, while the QSX frequency is displayed correctly. To give a practical example: VFO 1: 28.074 MHz VFO 2: 28.505 MHz
However, DX4WIN shows: Main Frequency: 2059.498,48 QSX Frequency: 28.505,00 This illustrates how the main frequency is read incorrectly, while the QSX frequency is displayed correctly. I'm using DX4WIN 9.0.9.1259 and baud rate set to 19200 on both side. Just to mention that I use MSHV on another virtual serial port, and in that case, the radio frequency is read correctly. I tried searching the reflector for any information that could help, but unfortunately, I couldn't find anything to solve the issue. Thank you in advance for any tips or guidance. 73 - Joe IU5JCI ______________________________________________________________ DX4WIN mailing list Home: http://mailman.qth.net/mailman/listinfo/dx4win Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
