“HF2 voisi olla laite josta voitaisiin tehdä seuraava ”Perseus”. Ostettaisiin
porukalla kortit, tehtäisiin kotelot ja laitettaisiin 5V lineaarinen virtalähde
valmiiksi kotelon sisälle.”
Erillinen virtalähde, ei kiitos.
Jos vaihtaisin nykyisen Elad S1 niin hankkisin tämän, huomatkaa mahtava 5 megan
kuuntelu/tallennuskaista (myös
vanhassa mallissa), hinta 525 ekee……
FDM-S2 is the second device born in our line ELAD SDR Samplers.
Direct sampling receiver based on 122.88MHz 16bit single channel ADC converter
covering HF 6m and offering the possbility to exploiting the undersamplig mode
covering FM Broadcasting Band and exploring part of VHF Band (135-160)MHz.
Ranges & most important specs:
HF: 9kHz-52MHz MDS: -132dBm @14MHz, Clipping lev -8dBm
FM: 74-108MHz sensitivity <2uV 12dB SINAD @98MHz, Clip lev -3dBm
VHF: 135-160MHz MDS -137dBm @145MHz, Clipping level -19dBm
Separate antenna inputs for HF/6m and FM/VHF/Bypass ranges
Max. DDC Bw 6144kHz (Aliasing free viewable bandwidth up to 5 Megahertz)
currently available selectable bitstreams:
192ksps-32bit, 384ksps-32bit, 768ksps-32bit, 1536ksps-32bit, 3072ksps-32bit,
6144ksps-16bit
Special double DDC mode of 2 x 384kHz bandwidth to be placed within one of the
input ranges.
4 virtual receivers freely tunable within DDC window
Each virtual receiver holds settings for mode,bandwidth,volume,squelch and
audio output routing.
Patent pending Triple Tuning Bar for coarse and fine spectrum navigation
CWU,CWL,USB,LSB,AM,SAM,FM,WFM,DSB,RTTY,DRM,RDS modes
Interference rejection: Noise Blanker,Adaptive Noise Reduction and auto notch,
special 2 manual notches (directly placed in DDC spectrum)
Integrated DRM decoding, text and station schedule update.
Integrated WFM Stereo with RDS decoding.
Universal CAT control and OmniRig(tm) integration
Customizable IF panadapter facilities for integration with existing
transceiver/receivers
User definable bandplan, specified settings per frequency range.
XML based memory management
DX cluster data integration and EIBI database import
Plotting of memory, database and cluster information directly on spectrum screen
Proprietary Ext IO bus for accessory equipment, also offering 8 DC lines for
universal switching (*via SFE1.0 board)
Supported by 3rd party software: SDR-RadioV2 , Winrad, HDSDR, Studio 1
DDC Spectrum recorder with automated timeschedule control
Seperate IF/AF spectrum windows for detailed signal analysis
Easy, fully informative User Interface with deep customization
Resizable windows and multi-monitor support
Wideband secondary Audio/IF outputs for decoder software (eg CW
Skimmer,WeatherFax)
Full integration of the Tmate(tm) series controllers
Compact size 110 (W) x 90 (D) x 40 (H) mm and 360g, come with 2 BNC to SMA
adapters, USB cable, USB double cable adapter, CD and safe bag.___________________________________________________________________________________
DX mailing list
DX@hard-core-dx.com
http://montreal.kotalampi.com/mailman/listinfo/dx
_______________________________________________
THE INFORMATION IN THIS ARTICLE IS FREE. It may be copied, distributed
and/or modified under the conditions set down in the Design Science License
published by Michael Stutz at http://www.gnu.org/licenses/dsl.html
