Tony, thanks for your tip.. I moved the cw keyer to com1 and it works...
Steve ----- Original Message ----- From: "Tony Cash [KD4K]" <[EMAIL PROTECTED]> To: "Steve Romagni" <[EMAIL PROTECTED]>; <[email protected]> Cc: "J. Lennox" <[EMAIL PROTECTED]> Sent: Sunday, January 06, 2002 12:17 PM Subject: Re: [DXBase] CW keyer problems > I have the same problem here. > Seems that DXBase CW does not support the USB to Serial ports. > It will work fine if I put the CW interface on Com 1 or 2 Standard Serial > Ports > but will not work on any of the Rocket port Serial ports. > I think this is another thing that should be fixed either now or in the next > release of > DXBase. > > ----- Original Message ----- > From: "Steve Romagni" <[EMAIL PROTECTED]> > To: <[email protected]> > Sent: Sunday, January 06, 2002 8:28 AM > Subject: [DXBase] CW keyer problems > > > > > > > > > > Hello all, > > > > Im having a problem with dxbase (2002), i cant get it the cw interface to > > work at all, I use the same interface cable that is describe on the help > > files and followed the steps on the manual, and it works with no problems > > with other windows based logging software (i.e writelog). the interface > is > > connected to port 6 which is part of my rockeport usb - serial adapter. I > > have the rig control on com 5 on the same device and it works fine... any > > one can share any tips? or what im doing wrong? > > > > Steve > > W4DTA > > > > > > > > _________________________________________________________ > > Do You Yahoo!? > > Get your free @yahoo.com address at http://mail.yahoo.com > > > > _______________________________________________ > > DXBase Reflector - Please visit us on the web at www.dxbase.com > > - - - - - - - - - - - - - - - - - - - - - - - > > To UNSUBSCRIBE please visit: > > http://mailman.qth.net/mailman/listinfo/dxbase > > > _________________________________________________________ Do You Yahoo!? Get your free @yahoo.com address at http://mail.yahoo.com
