I would concur with this recommendation and the recommendation of= Burghardt's. I bought a used Pro from them last month -- about $1650.00. The rig was in excellent condition and has performed flawlessly. It works well on PSK31 and other digital modes. One= nice thing about Burghardt's is that they give you top dollar on= trade-ins of late model equipment. They might, unfortunately,= draw the line at your Delta! ; - )
73 Carl =3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D Carl J. Denbow KA8JXG 17 Coventry Lane Athens, Ohio USA 45701-3718 =3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D On Mon, 25 Feb 2002 09:56:11 -0500, Douglass Tate wrote: > >I have used my Icom pro with a rig blaster on PSK, stream and= Slow >scan. It also has 6 meters with a scope. > >Call Burghardt Amateur Center at 1800 927 4261 for info. I= think >they are on special this month for $1,825 new. I paid >$2,800 a few years ago for this radio. > >With the ct 17 interface I control the radio from the computer= and >it logs the band and friq. I use Dxbase2002. > >73 Ab0MD >Douglass A Tate Sr. > > >-------------Forwarded Message----------------- > >From: Dave Chasey, INTERNET:[EMAIL PROTECTED] >To: , INTERNET:[email protected] > >Date: 2/25/02 2:10 AM > >RE: [DXBase] recomendations... > > >I'm a long term user of Dxbase, and recently installed the= upgrade >to 2002 that I bought at Dayton last year. I have been= interested >in getting on psk31. I've also independantly been interested= in >getting on 6 meter ssb & cw. > >My current HF rig is an old Ten-Tec 580 Delta. I really like >the Delta and it has served me extremely well, but it's going= on >25 years old and lacks some of the features of the newer= radios. >Since there is no computer control capability on the Delta, I >have not used that feature of Dxbase. > >I began looking for a 6 meter all mode rig, and it's almost as >much as getting a full 160M - to 6M rig. With that in mind,= I >decided to look into a radio that would do 160-6, and consider >using it primarily for PSK31 and for 6 ssb/cw, while still= using >the Ten-Tec for the other bands. Maybe after using it, I'd >use it as my main radio and move the Ten-Tec into the backup >spot. > >My questions are: > >- What HF rigs with 6 meter capability work best with DXbase? > >- What HF rigs integrate best with DXbase's PSK31 program? > >- Since you are using the computer's sound card for voice >announcements >of needed dx spots, how do you use that same card to send PSK31 >transmit >tones to the radio without a conflict? It would be quite >undesirable >to have "Oooh, I needed that" transmitted in the RTTY section of= 20 >meters, >and you usually wouldn't want to listen to the tones when >transmitting, >especially at the level you'd like the spots at. > >Any comments or advice would be appreciated... > >thanks.... > >....Dave Chasey -- [EMAIL PROTECTED] > > > >_______________________________________________ >DXBase Reflector - Please visit us on the web at www.dxbase.com >- - - - - - - - - - - - - - - - - - - - - - - >To UNSUBSCRIBE please visit: >http://mailman.qth.net/mailman/listinfo/dxbase > > > > >----------------------- Internet Header ----------------------------- >--- >Sender: [EMAIL PROTECTED] >Received: from mailman.qth.net (mailman.qth.net [64.238.2.60]) > by siaag1ad.compuserve.com (8.9.3/8.9.3/SUN-1.12) with ESMTP= id >DAA02082 > for <[EMAIL PROTECTED]>; Mon, 25 Feb 2002 03:10:50= -0500 >(EST) >Received: from mailman.qth.net (mailman.qth.net [64.238.2.60]) > by mailman.qth.net (Postfix) with ESMTP > id 37BAB328416; Mon, 25 Feb 2002 03:12:02 -0500 (EST) >Delivered-To: [email protected] >Received: from vet.vet.purdue.edu (vet.vet.purdue.edu >[128.210.96.50]) > by mailman.qth.net (Postfix) with ESMTP id CEE6B328241 > for <[email protected]>; Mon, 25 Feb 2002 03:11:44= -0500 (EST) >Received: (from [EMAIL PROTECTED]) > by vet.vet.purdue.edu (8.9.1b+Sun/8.9.1) id DAA04765; > Mon, 25 Feb 2002 03:09:37 -0500 (EST) >From: Dave Chasey <[EMAIL PROTECTED]> >Message-Id: <[EMAIL PROTECTED]> >To: [email protected] >Subject: [DXBase] recomendations... >Sender: [EMAIL PROTECTED] >Errors-To: [EMAIL PROTECTED] >X-BeenThere: [email protected] >X-Mailman-Version: 2.0.8 >Precedence: bulk >List-Help: <mailto:[EMAIL PROTECTED]> >List-Post: <mailto:[email protected]> >List-Subscribe:= <http://mailman.qth.net/mailman/listinfo/dxbase>, > <mailto:[EMAIL PROTECTED]> >List-Id: DXBase Reflector <dxbase.mailman.qth.net> >List-Unsubscribe:= <http://mailman.qth.net/mailman/listinfo/dxbase>, > <mailto:[EMAIL PROTECTED]> >List-Archive: <http://mailman.qth.net/pipermail/dxbase/> >Date: Mon, 25 Feb 2002 03:09:37 -0500 (EST) > >_______________________________________________ >DXBase Reflector - Please visit us on the web at www.dxbase.com >- - - - - - - - - - - - - - - - - - - - - - - >To UNSUBSCRIBE please visit: >http://mailman.qth.net/mailman/listinfo/dxbase -- Carl J. Denbow, [EMAIL PROTECTED] on 02/25/2002
