Where I am now . . . . I can telnet from a DOS command prompt to 131.156.2.135 41112 (again w/o a colon as telneting to 131.156.2.135:41112 fails.) I am asked for my callsign: w3bg [enter] . . . . . I get Password: [I just hit enter and get in].
I try to do this in DxBase and don't know how to handle the [Enter] in the user password box. I feel I am close. I attempted to add a password when logged on through DOS telnet, but could not . . . . seems the default is no password, yet it requires an [enter] in response to the password prompt. This is a good one people! Jim, W3BG ----- Original Message ----- From: "Jack" <[EMAIL PROTECTED]> To: "Tony Cash [KD4K]" <[EMAIL PROTECTED]>; "FireBrick" <[EMAIL PROTECTED]>; "James C Samuels Jr" <[EMAIL PROTECTED]>; "DXBase List" <[email protected]> Sent: Tuesday, June 11, 2002 10:39 PM Subject: Re: [DXBase] W9NIU inet connection > Interesting issue, but don't know why it is happening. Just for grins, I > tried the following site and connected without any problem: > > k3nc.no.ip.com:41112 > > So, the port is being used. Difference I see is the use of the literal > address rather than the base IP. Does anyone know the literal address for > the w9niu instead of the IP? > > Jack > > ----- Original Message ----- > From: "Tony Cash [KD4K]" <[EMAIL PROTECTED]> > To: "FireBrick" <[EMAIL PROTECTED]>; "James C Samuels Jr" > <[EMAIL PROTECTED]>; "DXBase List" <[email protected]> > Sent: Tuesday, June 11, 2002 9:31 PM > Subject: Re: [DXBase] W9NIU inet connection > > > > UH-OH > > Yep, that is what happened. > > Did a SH/VER and Got, > > PacketCluster (R) V5.4-53 > > Copyright (c) 1986-1998, Pavillion Software > > Back to the drawing board. > > > > 73 de Tony, KD4K > > > > My Weather page = http://home.adelphia.net/~tonycash > > My Ham Page = http://home.adelphia.net/~tonycash/kd4k/radio.html > > 147.150 Repeater Page = http://home.adelphia.net/~tonycash/sawnee/ > > > > ----- Original Message ----- > > From: "FireBrick" <[EMAIL PROTECTED]> > > To: "James C Samuels Jr" <[EMAIL PROTECTED]>; "DXBase List" > > <[email protected]> > > Sent: Tuesday, June 11, 2002 9:23 PM > > Subject: Re: [DXBase] W9NIU inet connection > > > > > > > I tried: > > > 131.156.2.135 41112#W9NIU > > > 131.156.2.135 41112 W9NIU > > > 131.156.2.135 41112 # W9NIU > > > > > > you may have gotten tripped up. I think you connected to the old > Pavilion > > > cluster. > > > There is a difference in the last octet of the two ip addresses. > > > the old address which ends in two weeks is 131.156.2.131 and is on > normal > > > port 23 > > > the new address ends in 135 and is on the 41112 port. > > > > > > When the normal telnet port of 23 is used, it is not necessary to use > the > > > colon and the number, it's assumed. > > > Only if using a different port will you need the colon. > > > > > > ----- Original Message ----- > > > From: "James C Samuels Jr" <[EMAIL PROTECTED]> > > > To: "FireBrick" <[EMAIL PROTECTED]>; "DXBase List" > > <[email protected]> > > > Sent: Tuesday, June 11, 2002 8:04 PM > > > Subject: Re: [DXBase] W9NIU inet connection > > > > > > > > > > Try leaving out the colon (just a space) in this instance. The host > > table > > > > should contain the entry: > > > > 131.156.2.132 41112#W9NIU > > > > > > > > Also host prompt should contain: >, and the user connect: DXC > > > > > > > > This worked for me. > > > > Jim, W3BG > > > > > > > > ----- Original Message ----- > > > > From: "FireBrick" <[EMAIL PROTECTED]> > > > > To: "DXBase List" <[email protected]> > > > > Sent: Tuesday, June 11, 2002 7:58 PM > > > > Subject: [DXBase] W9NIU inet connection > > > > > > > > > > > > > Just for the heck of it. > > > > > I tried XP's little connection applet Hyperterm. > > > > > > > > > > I was able to connect instantly to: > > > > > 131.156.2.135 using port 41112 > > > > > > > > > > > > > > > > > > > > > > > > > ------------------------------------------------------------ > > > > > MOP AND GLOW - Floor wax used by Three-Mile-Island cleanup team. > > > > > ------------------------------------------------------------ > > > > > > > > > > Bill H. in Chicagoland > > > > > [EMAIL PROTECTED] > > > > > > > > > > > > > > > > > > > > _______________________________________________ > > > > > DXBase Reflector - Please visit us on the web at www.dxbase.com > > > > > - - - - - - - - - - - - - - - - - - - - - - - > > > > > To UNSUBSCRIBE please visit: > > > > > http://mailman.qth.net/mailman/listinfo/dxbase > > > > > > > > _______________________________________________ > > > > DXBase Reflector - Please visit us on the web at www.dxbase.com > > > > - - - - - - - - - - - - - - - - - - - - - - - > > > > To UNSUBSCRIBE please visit: > > > > http://mailman.qth.net/mailman/listinfo/dxbase > > > > > > > > > > > > > > > > > _______________________________________________ > > > DXBase Reflector - Please visit us on the web at www.dxbase.com > > > - - - - - - - - - - - - - - - - - - - - - - - > > > To UNSUBSCRIBE please visit: > > > http://mailman.qth.net/mailman/listinfo/dxbase > > > > > > > > > _______________________________________________ > > DXBase Reflector - Please visit us on the web at www.dxbase.com > > - - - - - - - - - - - - - - - - - - - - - - - > > To UNSUBSCRIBE please visit: > > http://mailman.qth.net/mailman/listinfo/dxbase > > > > > _______________________________________________ > DXBase Reflector - Please visit us on the web at www.dxbase.com > - - - - - - - - - - - - - - - - - - - - - - - > To UNSUBSCRIBE please visit: > http://mailman.qth.net/mailman/listinfo/dxbase
