Thanks Fred! I have gone through all my cards and matched them against my data base...using the Wizard and printing using User Designed List and Logbook as the output form. While I did this I checked CQ-Zone & ITU-Zone and added IOTA and Grids where shown on the cards. I have been doing this in my 'spare time' (what's that?) for about a month. As of this moment my 6420 confirmed Q's match my cards exactly. Keeping things in sync from this point is going to be the challenge.
During the process I found quite a few new band modes that somehow never got marked as received in my log, No new countries however--still at 325 wkd & confirmed. I file my cards in this box: 902-94-BLA with 1/3 cut index card dividers: 902-11-801 from http://www.quill.com These are designed for 4 x 6 cards and QSL's fit in perfectly. Ron N5IN ----- Original Message ----- From: "Fred Handscombe" <[EMAIL PROTECTED]> To: "Ron Stordahl" <[EMAIL PROTECTED]> Sent: Thursday, August 08, 2002 1:16 AM Subject: Re: [DXBase] ZD7..wrong ITU Zone > Well spotted! > > 73 Fred > G4BWP > > ----- Original Message ----- > From: "Ron Stordahl" <[EMAIL PROTECTED]> > To: "Jack" <[EMAIL PROTECTED]>; "DXBase" <[email protected]> > Sent: Thursday, August 08, 2002 2:03 AM > Subject: [DXBase] ZD7..wrong ITU Zone > > > Just noticed that ZD7 is set as ITU 68 in the countries data base...it should > be ITU 66. This is in DXB2003, don't know about earlier releases. > > Ron N5IN > > > --- StripMime Report -- processed MIME parts --- > multipart/alternative > text/plain (text body -- kept) > text/html > The reason this message is shown is because the post was in HTML > or had an attachment. Attachments are not allowed. > Please post in Plain-Text only.--- > _______________________________________________ > DXBase Reflector - Please visit us on the web at www.dxbase.com > - - - - - - - - - - - - - - - - - - - - - - - > To UNSUBSCRIBE please visit: > http://mailman.qth.net/mailman/listinfo/dxbase > > > ----- Original Message ----- From: "Fred Handscombe" <[EMAIL PROTECTED]> To: "Ron Stordahl" <[EMAIL PROTECTED]> Sent: Thursday, August 08, 2002 1:16 AM Subject: Re: [DXBase] ZD7..wrong ITU Zone > Well spotted! > > 73 Fred > G4BWP > > ----- Original Message ----- > From: "Ron Stordahl" <[EMAIL PROTECTED]> > To: "Jack" <[EMAIL PROTECTED]>; "DXBase" <[email protected]> > Sent: Thursday, August 08, 2002 2:03 AM > Subject: [DXBase] ZD7..wrong ITU Zone > > > Just noticed that ZD7 is set as ITU 68 in the countries data base...it should > be ITU 66. This is in DXB2003, don't know about earlier releases. > > Ron N5IN > > > --- StripMime Report -- processed MIME parts --- > multipart/alternative > text/plain (text body -- kept) > text/html > The reason this message is shown is because the post was in HTML > or had an attachment. Attachments are not allowed. > Please post in Plain-Text only.--- > _______________________________________________ > DXBase Reflector - Please visit us on the web at www.dxbase.com > - - - - - - - - - - - - - - - - - - - - - - - > To UNSUBSCRIBE please visit: > http://mailman.qth.net/mailman/listinfo/dxbase > > >
