Jim, Before I would even attempt to offer you advice at this point, I would have to fully understand what you have done and what you are trying to do. It is probably still possible to salvage things but I can't really give you any guidance without knowing what you have done. Maybe we should discuss on the phone?
Jack ----- Original Message ----- From: "JIM BROWN" <[EMAIL PROTECTED]> To: "Jack" <[EMAIL PROTECTED]>; "dxb" <[email protected]> Cc: <[EMAIL PROTECTED]> Sent: Thursday, September 05, 2002 3:24 PM Subject: Re: [DXBase] Default.mdb. > Well here I go again. I took cortneys advise and looked to where my files > were going.>DEFAULT.MDB>. I tried to make a correction thru Tony's advice > and put a check in the dxbase/field order I wanted to use.....Now all I get > is Unrecognized database format c:\program files\Scientific > Solutions\DXbase2003\n4zy.mdb. And I cannot get into DXbase at all. I hope > I will not have to dump dxbase and reinstall it. I have back files from > 7/20/2003 as far logs go. but after looking at them the log database on the > back up shows default. Any Ideas ??? Thanks All de Jim N4ZY > ----- Original Message ----- > From: Jack <[EMAIL PROTECTED]> > To: JIM BROWN <[EMAIL PROTECTED]>; dxb <[email protected]> > Sent: Tuesday, August 27, 2002 20:13 PM > Subject: Re: [DXBase] Default.mdb. > > > > Jim, > > > > I believe Tony has given you the answer. But, wanted to also mention that > > since you don't know how you ended up with default.mdb as your active > > database, there is change you have been logging QSOs into a database that > > you didn't think was in use. Best if you check things out and figure out > if > > all is as you expected. As for MMTY engine, suggest you check out the web > > to see if they have by chance added the interface in their program to > > DXbase. We published sample code a long time ago that allows any of these > > digital/rtty programs to log directly into DXbase. We have no plan or > > desire to reinvent the wheel by developing special programs for these. > The > > authors of these programs have done a pretty good job with the digital > > aspects and it's much better to just allow them to interface directly with > > DXbase. > > > > Regards, > > Courtney > > > > ----- Original Message ----- > > From: "JIM BROWN" <[EMAIL PROTECTED]> > > To: "dxb" <[email protected]> > > Sent: Tuesday, August 27, 2002 3:45 PM > > Subject: [DXBase] Default.mdb. > > > > > > Well I got my self in another mess. I was importing adif files from mmtty/ > > zakanaka.some how my qso log now shows Default mdb. I cannot fine a way to > > change it back to N4ZY.mdb ((((((HELP))) pse DE Jim N4ZY.ps will there > > ever be a mmtty engine to go along with the psk?? JIM > > > > > > --- StripMime Report -- processed MIME parts --- > > multipart/alternative > > text/plain (text body -- kept) > > text/html > > The reason this message is shown is because the post was in HTML > > or had an attachment. Attachments are not allowed. > > Please post in Plain-Text only.--- > > _______________________________________________ > > DXBase Reflector - Please visit us on the web at www.dxbase.com > > - - - - - - - - - - - - - - - - - - - - - - - > > To UNSUBSCRIBE please visit: > > http://mailman.qth.net/mailman/listinfo/dxbase > > > > > > >
