That should have been: type C:\command forgot the ":". The purpose of including the C:\ is to get you to the root to execute the 'command'.
Ron ----- Original Message ----- From: "Ron Stordahl" <[EMAIL PROTECTED]> To: "Mail fromJim/Connie" <[EMAIL PROTECTED]>; <[email protected]> Sent: Sunday, November 03, 2002 11:31 PM Subject: Re: [DXBase] Fw: Internet cluster > First let's determine if you have internet access to any cluster via telnet: > > At the lower left hand corner click Start, then Run. This will open a Run > box. In that type C\command > > Now you will have a DOS box with a C:\> prompt. Type telnet dxspots.com > and hit the enter key. > > This should open a Telnet window saying you are connected to N5IN at > 204.21.76.52. > > Did you get this far? If you did, then we can take the next step, but let's > see if you get this far first. > > Ron N5IN > > > > ----- Original Message ----- > From: "Mail fromJim/Connie" <[EMAIL PROTECTED]> > To: <[email protected]> > Sent: Sunday, November 03, 2002 11:13 PM > Subject: [DXBase] Fw: Internet cluster > > > > > > > > > > I recently installed DXbase 2003 and used all the same settings as I had > in > > DXbase 2002 for the Internet Cluster (TOOLS, OPTIONS, USER OPTIONS, > > INTERNET) > > The Internet Cluster worked fine on DXbase 2002. > > I can not get the same cluster site ( or any other site) to connect > through > > DXbase 2003. > > I have no problem getting the site up and running when not using DXbase > > 2003. > > I can't getting any cluster sites to conect through DXbase 2003. > > I have checked and re-checked my settings in the INTERNET site settings > and > > they are the same as my DXbase 2002 settings. > > Any suggestions? > > > > Jim VA6JR > > > > _______________________________________________ > > DXBase Reflector - Please visit us on the web at www.dxbase.com > > - - - - - - - - - - - - - - - - - - - - - - - > > To UNSUBSCRIBE please visit: > > http://mailman.qth.net/mailman/listinfo/dxbase > > > > _______________________________________________ > DXBase Reflector - Please visit us on the web at www.dxbase.com > - - - - - - - - - - - - - - - - - - - - - - - > To UNSUBSCRIBE please visit: > http://mailman.qth.net/mailman/listinfo/dxbase >
