Ha! That's why it seemed inconsistent to me. I never noticed that. I just tried it. See, I learned something new today. Thanks ----- Original Message ----- From: "Steve Russell" <[EMAIL PROTECTED]> To: "FireBrick" <[EMAIL PROTECTED]>; "DXBase List" <[email protected]> Sent: Thursday, November 21, 2002 12:41 PM Subject: Re: [DXBase] feature or anomaly
> Hi Bill, > > I do not see it read the freq from the rig in either case. Also, it depends > on which column I'm in in the Cluster window. If I right click in the Type > column, it sets the rig to the cluster freq. Any other column simply logs > from the cluster info, like in the DX info window. > > -Steve, AA3ZV > > ----- Original Message ----- > From: "FireBrick" <[EMAIL PROTECTED]> > To: "DXBase List" <[email protected]> > Sent: Thursday, November 21, 2002 7:12 AM > Subject: [DXBase] feature or anomaly > > > > I think I've found a slight difference in how 'Log Current Entry' works > from > > the Cluster Window to the DX INFO Window. > > > > If a cluster spot comes that you wish to work and you tune the rig to that > > frequency. > > You may or may not be exactly the same as the Cluster frequency due to > > slight errors or differences between rigs or cluster rounding. > > > > You work the station. > > Now here is where the difference SEEMS to come in. > > If from the Cluster right click menu I choose 'Log Current Entry' it logs > > the entry but also changes the log AND the rig to reflect the cluster > > frequency. > > If from the DX INFO right click menu I choose 'Log Current Entry' it logs > > the entry BUT enters the frequency from the rig and does not change the > rig > > to match the cluster spot frequency. > > > > This is a very minor issue but does come into play when the DX station has > > drifted or qsy'ed slightly since the cluster spot came in. > > > > To me the difference between the two windows is a feature. > > > > Interested to see if other users have it work this way. > > Running 2003, on a XP machine with a FT1000MP rig, fully interfaced. > > > > > > ----------------------------------------------------- > > How do I set my LaserPrinter to "Stun"?! > > ----------------------------------------------------- > > > > Bill H. in Chicagoland > > > > _______________________________________________ > > DXBase Reflector - Please visit us on the web at www.dxbase.com > > - - - - - - - - - - - - - - - - - - - - - - - > > To UNSUBSCRIBE please visit: > > http://mailman.qth.net/mailman/listinfo/dxbase > > > > >
