I got DXBase 2003 to see my Kenwood TS2000X this morning. Strangely enough what I had to do was when I set it up on Com 4, my Lavaport card, I had to set up the baud rate as 4800 but even though it showed parity as NONE it did not work. I went back into the setup and set it to ODD and then back to NONE and it came up OK. I know that is weird as that is the same settings I use on the FT1000MP but that was the only way I could get it to work.
Now Jack for another feature in the next release. I use the FT1000MP for HF and the TS2000X for VHF/UHF. What would truly be nice is a hot key to change the setting for the rig control from one transceiver to the other. I would like to thank ON4VP for his input on the baud rate. With all due respect I would like to keep the FT1000MP and TS2000X as close to the same in order to eliminate so many changes when I change from HF to VHF/UHF. If we had a HOT KEY we could go into the parameters separately and program them to come up with the HOT KEY. Is that something that can be done Jack ? --- StripMime Report -- processed MIME parts --- multipart/mixed text/plain (text body -- kept) The reason this message is shown is because the post was in HTML or had an attachment. Attachments are not allowed. Please post in Plain-Text only.---
