Marty, Assuming you are using a standard serial port and you do not have any IRQ conflicts, then the setup is straightforward.
1. Set user options for CW making sure you select the activate button for internal CW. 2. Make sure you have the required registry entries as described in the help file. Pay attention to the address that was assigned by DXbase. On some systems your actual address for your serial port may be different and you would have to modify the registry entry we made to agree with your actual hardware. 3. If you are using XP, check our web for some additional info about the drivers for that. 4. Make sure you have constructed a circuit similar to the one pictured in the help file. This is similar to the ones used with CT and Writelog. I can't think of nothing else. Regards, Courtney ----- Original Message ----- From: "Marty Ray" <[EMAIL PROTECTED]> To: "Tony Cash" <[EMAIL PROTECTED]>; <[email protected]> Sent: Wednesday, November 27, 2002 11:25 AM Subject: Re: [DXBase] CW port still not working > Thanks. Tony. I tried com1 and it does the same thing. Radio works, "default > DTR 'HIGH' " keys the radio, but no cw out. > > Anybody have any other suggestions? > > 73 de Marty > ----- Original Message ----- > From: "Tony Cash" <[EMAIL PROTECTED]> > To: "Marty Ray" <[EMAIL PROTECTED]>; "Matt Finlayson" <[EMAIL PROTECTED]>; > <[email protected]> > Sent: Wednesday, November 27, 2002 6:56 AM > Subject: Re: [DXBase] CW port still not working > > > > Is this com4 that you are trying to use, something other than a standard > > windows com port. I know I have a USB to SERIAL adapter that I use > > here and the com ports on it are com 3 thru com 6 and they will not work > > with the CW keying of DXBase. If I use com 1 or 2 that are located on the > > mother board then it works fine. Have you tried using the same setup but > > switching > > it to com 1 or 2? > > > > I think Jack needs to fix this in the next version and make DXBase use ANY > > serial port that Windows recognizes, most programs already do but some > > don't. > > > > 73 de Tony, KD4K > > > > My Weather Page > > http://home.adelphia.net/~tonycash/ > > My Ham Radio Page > > http://home.adelphia.net/~tonycash/kd4k/radio.html > > Sawnee Mountain (WB4GQX 147.15 +.600) Repeater Page > > http://home.adelphia.net/~tonycash/sawnee/index.html > > > > ----- Original Message ----- > > From: "Marty Ray" <[EMAIL PROTECTED]> > > To: "Matt Finlayson" <[EMAIL PROTECTED]>; <[email protected]> > > Sent: Wednesday, November 27, 2002 1:29 AM > > Subject: Re: [DXBase] CW port still not working > > > > > > > I know some of the guys are using third party drivers or something to > use > > > the parallel port with Windows XP, but I have heard that it doesn't work > > > very well. I just want to get it running per the help file, if I can... > > > > > > Thanks for the tip, though. > > > > > > One other interesting fact is that someone pointed out that there is no > > > IRQ17. I went back and checked and sure enough it is IRQ17. I also > checked > > > the other port on the PCI card and it also says IRQ17, but there are NO > > > CONFLICTS listed! Everything on those ports works, too. I'm running my > > radio > > > on com4 and my rotor on com5, just no cw coming from the DTR...hmm.... > : > > ( > > > > > > 73 de Marty > > > > > > ----- Original Message ----- > > > From: "Matt Finlayson" <[EMAIL PROTECTED]> > > > To: "Marty Ray" <[EMAIL PROTECTED]>; <[email protected]> > > > Sent: Wednesday, November 27, 2002 4:29 AM > > > Subject: Re: [DXBase] CW port still not working > > > > > > > > > > Hi Marty, > > > > > > > > I use a laptop to run DXBase and my rig. Since I only have one serial > > > port, > > > > I use that to run the rig. I use the parallel port for CW. I paid $25 > > for > > > a > > > > CW-interface cable that goes from the parallel port to the key jack on > > my > > > > radio. Works fine. > > > > > > > > 73, Matt K9KRY > > > > > > > > ----- Original Message ----- > > > > From: "Marty Ray" <[EMAIL PROTECTED]> > > > > To: <[email protected]> > > > > Sent: Monday, November 25, 2002 6:15 PM > > > > Subject: [DXBase] CW port still not working > > > > > > > > > > > > > I have been trying to get the cw port working for a couple of weeks. > I > > > am > > > > > running windows XP, so I am using DTR on my radio serial port. (The > > help > > > > > file states "DXbase allows you to use the same serial port for CW > that > > > is > > > > > used for your TNC or HF radio provided it does not use the DTR > > leads.") > > > > When > > > > > I set "default DTR High" on the radio port settings, my radio keys > up, > > > > which > > > > > is correct. However, whe I try to send CW, I get nothing. > > > > > > > > > > I have tried setting the com port address in the driver using > > 'regedit' > > > to > > > > > no avail. When I look at my com port address in my > > > system\hardware\device > > > > > manger\com4\resources, it shows "I/O range C400-C407" and "IRQ17", > so > > I > > > > set > > > > > the com4 data in regedit as follows: > > > > > "SYSTEM\CurrentControlSet\Services\DriverX\Parameters\Dxb98 COM4\ > Port > > > > Base > > > > > 0x0000c400 (50176)" > > > > > > > > > > PortCount says "0x00000007 (7)" > > > > > > > > > > (Default) says "(value ot set)" > > > > > > > > > > and IgnoreConflicts says "0x00000001 (1)" > > > > > > > > > > Does anybody have any suggestions. I operate primarily CW, so this > > > > > limitation may be enough for me to look at another logging program. > > > > > > > > > > Thanks for any assistance! > > > > > > > > > > Regards, > > > > > > > > > > Marty Ray N9SE > > > > > > > > > > > > > > > _______________________________________________ > > > > > DXBase Reflector - Please visit us on the web at www.dxbase.com > > > > > - - - - - - - - - - - - - - - - - - - - - - - > > > > > To UNSUBSCRIBE please visit: > > > > > http://mailman.qth.net/mailman/listinfo/dxbase > > > > > > > > > > > > > > > > > > > _______________________________________________ > > > DXBase Reflector - Please visit us on the web at www.dxbase.com > > > - - - - - - - - - - - - - - - - - - - - - - - > > > To UNSUBSCRIBE please visit: > > > http://mailman.qth.net/mailman/listinfo/dxbase > > > > > > > > > > > _______________________________________________ > DXBase Reflector - Please visit us on the web at www.dxbase.com > - - - - - - - - - - - - - - - - - - - - - - - > To UNSUBSCRIBE please visit: > http://mailman.qth.net/mailman/listinfo/dxbase >
