Hi folks, I'm attempting to get a Yaesu FT-847 working with DX Base, and and afternoon of tinkering left things in the same un-functioning state.
The radio and computer are connected by a null-modem cable as recommended by Yaesu. When using my contest software, N1MM logger, it functions perfectly - communication happens seamlessly, and I'm able to control the radio every time. The CAT light on the radio also illuminates the minute N1MM opens and extinguishes when it's closed. When I bring up DX Base, I go into Tools, Options and enable the HF Interface. Since there's no specific setting for the FT-847, I just went ahead and tried every radio model listed. No-go. I verified that the radio is set for 4800 baud, No parity, 8 bits 2 stop bits, and matched those settings in DX Base. I even went so far as to set the port itself (com 2) to these parameters. No Go. Even tried checking the DTR high box, to no avail. I'm afraid I'm rather stumped. Can any of the assembled multitude point me in a direction that might get DX Base and this 847 to talk to each other? Thanks in advance. 73 de Peter (W2IRT) [EMAIL PROTECTED] Please visit http://www.nyctrackbook.com for details of my book Tracks of the NYC Subway
