Aaaahhh, there is. It's called overtype what's already there and press the c/r.
Cheers, Jack ----- Original Message ----- From: "FireBrick" <[EMAIL PROTECTED]> To: "Sergei Litvinov" <[EMAIL PROTECTED]>; <[email protected]> Sent: Monday, June 23, 2003 4:41 PM Subject: Re: [DXBase] Manager imput > Good idea, except as I'm always connected to the cluster, my QSL Info window > is almost always populated with the last spot. > So I'd have to 'erase' the call in the DXCAll window first. > So for me it would be 6 of 1, half dozen of another. > > Now if there was a "clear callsign" button in the QSL Info window to click > on first.... > Have to think about that and see if it would be less characters/mouse > clicks. > I'm incredibly lazy...and always looking for a shortcut. :-)) > > ----- Original Message ----- > From: "Sergei Litvinov" <[EMAIL PROTECTED]> > To: <[email protected]> > Sent: Monday, June 23, 2003 3:07 PM > Subject: Re: [DXBase] Manager imput > > > > > And you don't really even have to scroll to the callsign. > > > Just type the call into the log, do not save it. > > > The QSL Info Window will accept that data now > > > And then hit the Save button in the QSL INFO window. > > > After that, just go back to the log entry and delete it. > > > > Or even simply type in the callsign into the QSL INFO window without > having > > put it in the log and delete then. > > > > Regards & 73 de Sergei > > UX1UA aka UV5U, EN1U > > [EMAIL PROTECTED] > > www.qsl.netux1ua > > WRTC '00, '02 photos, OI2HQ photos, UV5U logs and more... > > > > ----- Original Message ----- > > From: "FireBrick" <[EMAIL PROTECTED]> > > To: <[email protected]>; "David Fagundes" <[EMAIL PROTECTED]> > > Sent: Monday, June 23, 2003 1:29 AM > > Subject: Re: [DXBase] Manager imput > > > > > > > > > > > > > > > > > This is the scenario: > > > > In DXB2003 I'm logging a lot of callsings, in the middle someone says > > that > > > > the QSL is via manager call=XXZYY, in the logging window where I put > the > > > info? > > > > I need to add the manager in the table during a QSO or not? > > > > > > > > 73's to all > > > > From David > > > > CU3ED > > > No, you don't have to put it in right then. > > > If you have a good memory, you can put it in anytime. > > > Just scroll to that qso, click on it and the QSL Info window will be > able > > to > > > accept the managers call and address. > > > As long as you put on 'lock' so a new cluster spot does not change the > > info. > > > > > > Frequently when reading bulletins I'll find a qsl manager or route for > > > someone I worked recently. > > > > > > And you don't really even have to scroll to the callsign. > > > Just type the call into the log, do not save it. > > > The QSL Info Window will accept that data now > > > And then hit the Save button in the QSL INFO window. > > > After that, just go back to the log entry and delete it. > > > > > > > > > _______________________________________________ > > > DXBase Reflector - Please visit us on the web at www.dxbase.com > > > - - - - - - - - - - - - - - - - - - - - - - - > > > To UNSUBSCRIBE please visit: > > > http://mailman.qth.net/mailman/listinfo/dxbase > > > > > > > _______________________________________________ > > DXBase Reflector - Please visit us on the web at www.dxbase.com > > - - - - - - - - - - - - - - - - - - - - - - - > > To UNSUBSCRIBE please visit: > > http://mailman.qth.net/mailman/listinfo/dxbase > > > > > > _______________________________________________ > DXBase Reflector - Please visit us on the web at www.dxbase.com > - - - - - - - - - - - - - - - - - - - - - - - > To UNSUBSCRIBE please visit: > http://mailman.qth.net/mailman/listinfo/dxbase >
