Yes the K2 command set is based on the kenwood series, the best 'mach' being the ts570. However DXB2004 fully supports the K2 and the addition to the INI file to add K2 support to DXB2004 should work ok for DXB 2003 too.
The K2 command file works better the the kenwood files since it fully supports all DXbase features in relation to split operation etc. it's also much faster since the K2 does not need the commands slowed down to work reliably like many other radios. In this shack the K2/100 is set up as radio 1 and radio 2 is the 756pro2 73 Brendan EI6IZ (K2 # 1642) At 17:05 04/10/2003, FireBrick wrote: >I'm pretty sure the K2 utilized the Kenwood TS series commands. >I think I read that on Writelog. >Try telling DXB that it's really a Kenwood TS950 or 2000. > > >----- Original Message ----- >From: "Dan Copeland" <[EMAIL PROTECTED]> >To: <[email protected]> >Sent: Saturday, October 04, 2003 10:55 AM >Subject: [DXBase] Elecraft K2 > > > > I just installed DXBASE 2004 and everything works great except > > the radio control. I have a K2 and it works with the program > > from Elecraft just fine. Does anyone know what I should do? > > > > Dan N0DT > > > > _______________________________________________ > > DXBase Reflector - Please visit us on the web at www.dxbase.com > > - - - - - - - - - - - - - - - - - - - - - - - > > To UNSUBSCRIBE please visit: > > http://mailman.qth.net/mailman/listinfo/dxbase > > > > > >_______________________________________________ >DXBase Reflector - Please visit us on the web at www.dxbase.com >- - - - - - - - - - - - - - - - - - - - - - - >To UNSUBSCRIBE please visit: >http://mailman.qth.net/mailman/listinfo/dxbase
