Hi, I'm trying to use the 8161 SWL label template to print SWL labels. When I run the batch it prints the SWL station's call in the SWL callsign box as it's supposed to, but it also puts the SWL's callsign in the field for the station he overheard me working.
What I do to get it to that point is invoke the previous QSO dialog, enter the callsign of the station the SWL heard me working, select the appropriate one(s) and press the SWL REPLY button, with mode set to Card (not LoTW). It asks me the SWL's call and RST after each one. When I then go to run the label job, I select label group S and select 8161SWL.lbl. It again asks me the SWLs callsign and the Buro or address for each label. I run the job and it will say something like To SWL SP1234-56 via SP Buro this confirms your reception report of: W2IRT in conversation with SP1234-56 (then the date/mode/time/etc) When I open the label file in the editor the CALL field is in the correct place. After fidgeting with it for a few minutes it appears that it inserts into the CALL field whatever value I enter in the dialog box that pops up after hitting the SWL reply button (i.e. the first time it asks for the SWL call sign). This is obviously in error. What can I do to get this working as it should? 73 de Peter (W2IRT) [EMAIL PROTECTED] Please visit http://www.nyctrackbook.com for details of my book Tracks of the NYC Subway
