To all:
I spoke with Jim last night about the problem. And, it turned out that the QSO's that did "not" print the QSL Via + manager were QSO's that Jim had flagged as QSL Via Bureau.. If I recall correctly, the addition of the QSL Via method of "MGR-Buro" came out after DXBase2002. With the current structure of DXbase2004, any QSO that is flagged with "Bureau" as the QSL Via method - does "not" allow the print of the QSL Via + manager .. that is why the "MGR-Buro" was added .. flagging the QSO's in question with "MGR-Buro" solved the problem.. The above is provided as feedback on the problem that Jim had. 73 Joe WA6AXE Jim wrote: > I recently upgraded from DXB 2002 to DXB 2004. I'm now encountering a > new problem printing QSO labels, which I have done many times. > > For some reason, the "QSL VIA" + manager does not print on SOME labels, > but does print on others. Other data on the labels print as expected. > > It does not seem to matter which .lbl file I use as a template. (The > same thing happens with the 5160-1q.lbl template provided with the > program and with another I have created.) The manager is listed in the > Manager Address data base, and the DX station's map to the manager is > entered and numbered as "1". The Labels data base shows the Route as "1". > > What could be causing this? TIA. > > Jim N4AL > > _______________________________________________ > DXBase Reflector - Please visit us on the web at www.dxbase.com > - - - - - - - - - - - - - - - - - - - - - - - To UNSUBSCRIBE please visit: > http://mailman.qth.net/mailman/listinfo/dxbase >
