I had the same problem. I wound up deleting DXbase and reinstalling it. It has worked ever since. Make sure you back up your files first!
Fred, K1ACL -----Original Message----- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Jack Sent: Friday, April 09, 2004 6:59 PM To: [email protected]; Pencom - Wizards Subject: Re: [DXBase] DXBasePSK 1.0 Broken Try following the instructions in the help file under the main topic Error Messages and sub topic DXBPSK performed an illegal operation. Maybe this would help. Regards, Courtney ----- Original Message ----- From: "Pencom - Wizards" <[EMAIL PROTECTED]> To: <[email protected]> Sent: Friday, April 09, 2004 7:25 AM Subject: [DXBase] DXBasePSK 1.0 Broken > I use DXbase 2004 and the main program works 100%, but I cannot get > DXBasePSK to run. > > I get "An unsupported operation was attempted" error message and thats all!. > > It used to work when I 1st installed it, but I have never really wanted to > use it until now. > > I have DXbase on 2 PC's and it works OK on the other machine so I copied > the executable DxbPSK.exe and WINPSKX.dll to the broken machine but still > the same error message. > I even tried some newer versions of the DLL and in both the DXBase folder > and the System32 folder, but still don't work. > Perhaps there is some more .dlls used by DXBasePSK that are missing or > corrupt, but I don't know which. > > I looked in DXBase.ini on both machines and the PSK section is the same on > both, its got me beat :-(( > > Any help would be MUCH appreciated. > > > 73 de G4PZN (Barney) > > _______________________________________________ > DXBase Reflector - Please visit us on the web at www.dxbase.com > - - - - - - - - - - - - - - - - - - - - - - - > To UNSUBSCRIBE please visit: > http://mailman.qth.net/mailman/listinfo/dxbase > _______________________________________________ DXBase Reflector - Please visit us on the web at www.dxbase.com - - - - - - - - - - - - - - - - - - - - - - - To UNSUBSCRIBE please visit: http://mailman.qth.net/mailman/listinfo/dxbase
