John, Yep - your results are quite similar to mine!! What you can do -- and ONLY if you want to (at this time) -- is to take the printout and go into your Previous QSO window and bring up each of the Callsigns or Prefixes and "manually" change them to what they are supposed to be.
Again - as with anything that I make in the way of reports, etc -- they are meant to be a HELP to the user -- if the user decides not to do anything with the info -- that's fine ... if they want to make the logbook changes -- that's fine too ... It is totally up to you.. I PERSONALLY have changed all of my single CQ Zone and ITU Zone mistakes in my logbook - to reflect what they SHUD BE -- only because I want my logbook to be as up-to-date as possible.. The report itself can not change the zones automatically -- that is where a little manual intervention (for now) comes in.. Gud Luck!! 73, Joe wa6axe John Pelham wrote: > Joe, > > Thanks for creating this report. I ran it on my 5800-Q log. I got > 2-and-a-half pages of errors. Almost all are ITU (not CQ) zone problems. > And almost all are from DXCC entities LY, OK and YO. And just a couple > each from ZD7, S0, VK9P, VK9W. > > Since you used the refdata.mdb as the reference, this means either > (a) I manually changed the zone when logging, or > (b) The refdata.mdb file has changed since when I logged the QSOs > > I'm not sure what to do with the results, and whether I should go back and > change them all. > > 73, W1JA > > John Pelham > E-mail [EMAIL PROTECTED] > Antique Radio Web Site http://www.radiophile.com > > > ----- Original Message ----- > From: "Joseph Glockner" <[EMAIL PROTECTED]> > To: "DXbase reflector" <[email protected]> > Sent: Friday, May 07, 2004 1:21 AM > Subject: [DXBase] Logbook's CQ and ITU Zones - a question from Joe wa6axe > > > >>To all, >> >>I would like to find out how your logbooks turned out after >>running the checkmyzones.rpt Report -- if you ran it >>against your whole logbook.. >> >>For me -- Running against the whole logbook gave me one full >>page of errors -- plus -- 9 entries on the 2nd page ... >> >>The majority of my errors were ITU Zone number errors on the >>Entities of: >> >>CT (CT98xxx) >> >>YO >> >>ZD7 >> >> >>Using the Previous QSO window - it only took a minute or so to >>correct the zone mistakes in my logbook (manual intervention). >> >>Did anyone find more than 2 pages of errors ?? >> >> >>73 Joe wa6axe >> >> >>_______________________________________________ >>DXBase Reflector - Please visit us on the web at www.dxbase.com >>- - - - - - - - - - - - - - - - - - - - - - - >>To UNSUBSCRIBE please visit: >>http://mailman.qth.net/mailman/listinfo/dxbase >> > > > > _______________________________________________ > DXBase Reflector - Please visit us on the web at www.dxbase.com > - - - - - - - - - - - - - - - - - - - - - - - > To UNSUBSCRIBE please visit: > http://mailman.qth.net/mailman/listinfo/dxbase >
