Hi The command differs by the node. I think that k4uga-node is clx.
Consult the following comment by k4uga. http://k4uga.tsars.uga.edu/~k4uga/overview.html SEt/FIlter <nr1,nr2,..,nrX> This command lets you set reject filters as defined by your sysop. You first should look up which filters are defined at your CLX node. This is the default list: Filter Meaning ------------------------------------- 1 VHF 144.000 MHz and up 2 HF 30.000 MHz and down 3 TOP 1.800-2.000 MHz 4 all the CW band segments 5 all the SSB band segments 6 all the RTTY band segments 7 all the WARC bands ------------------------------------- Your sysop may or may not have defined further filters. You can find out by using the SHOW/FILTERS command. After you have decided which filters you would like to switch in, you use the command as follows: SET/FILTER 4,6 This turns on the CW and RTTY filters, so will leave you only with SSB spots. To further narrow the filter settings, you can add more filters: SET/FILTER 1,3 The setting is now 1,3,4 and 6 which eliminates all spots except SSB spots on the HF bands from 80 to 10 meters, including the WARC bands. At 09:12 04/07/07, JIM K2SNJ wrote: > > I am using the internet dx cluster of K4UGA. Does anyone know the command >to filter out all the VHF,UHF spots. I am only interested in HF dx spots. > >Jim - K2SNJ > >_______________________________________________ >Dxbase mailing list >[email protected] >http://mailman.qth.net/mailman/listinfo/dxbase **JA2MNB****************************K7NB** YOSHI HIKO HIRANO CELLULAR 090-5607-0779 FAX/TEL 0568-21-0919 ---------- <BS> - [EMAIL PROTECTED] --- -- <OFFICE> - [EMAIL PROTECTED] ---
