I have a Yaesu Mark V and it works just fine with dxBase 2005, but I would like to make a change to something, just not sure how to go about it. I think the change would also be made in the Radios.INI file. Again now sure what to change.
I used HamScope to do my PSK. It calls MMTTY to do RTTY. In order to use HamScope to do RTTY I need to switch the radio to PKT/USB then when I pick the RTTY mode in the program all works fine. Now what I want to do is whenever dxBase tells the radio to go to a certain frequency which is programmed for RTTY I want the radio to setup as PKT/USB instead of RTTY. Does that make sense? The reason I want to do this is when the radio goes to RTTY mode it seems to switch to LSB. When I change the PKT/USB so I can use RTTY the frequency changes and I have to retune to the freq it just came from. Any ideas? Thanks and 73s Bob KB4CL From [EMAIL PROTECTED] Thu Oct 28 15:35:57 2004 From: [EMAIL PROTECTED] (FireBrick) Date: Thu Oct 28 15:37:57 2004 Subject: [Dxbase] Re: [RTTY] Logging software? References: <[EMAIL PROTECTED]> Message-ID: <[EMAIL PROTECTED]> Hmmmmmm Art, I use MMTTY also, and maybe we are talking about two different things. First off, you can call MMTTY from the Programs Menu option, you don't have to turn rig control off, and MMTTY can be set to the same com port at DXBase cw is set to. MMTTY has it's own little logging program that is easily .adi imported to DXBase. or You can download the free HamScope which uses the MMTTY engine and does save directly to DXBase. At this very moment, I have DXBase and MMTTY both working on the same computer and each on a different monitor although I could easily do it on the same monitor. You are correct in that MMTTY will not DDE link to DXBase, but I don't think it will do that to any logging program other than Writelog which needs that little add-on applet. Please let me know why you have to turn off DXB rig control. ----- Original Message ----- From: <[EMAIL PROTECTED]> To: <[EMAIL PROTECTED]> Cc: "RTTY" <[EMAIL PROTECTED]> Sent: Thursday, October 28, 2004 2:11 PM Subject: Re: [RTTY] Logging software? >I know nothing about DX4Win but I can tell you that DXBase does not currently >support >MMTTY. I do use DXBase 2005 and I am a big fan of it but this is, IMO, a >serious >weakness. What I do when operating non-contest RTTY is launch DXBase, start >the internet >cluster window (so I can get RTTY spots) and then turn off rig control. Then >launch >MMTTY and either manually log Qs in DXBase or log them in MMTTY and import >them into >DXBase. Not the best way to work. > > 73, > Art > W2NRA > > >> Hi all, >> >> I have been looking at changing my logging software. >> I need something that will track my DXCC, WAZ, WAS etc, import/export ADIF >> and do post event logging. >> I do not need contest logging, or real time logging really, although if the >> software could interface with MMTTY, so much the better. If I import an ADIF >> file after a contest, it would be useful if it could tell me which countries >> were new ones. LoTW is also used here. >> >> So far, I have been trying to decide between DXBase and DX4WIN, but I can't >> quite make up my mind. >> >> Any ideas? >> >> As this is off-topic, could you please reply to me directly? >> The email address is [EMAIL PROTECTED] > > > _______________________________________________ > RTTY mailing list > [EMAIL PROTECTED] > http://lists.contesting.com/mailman/listinfo/rtty >
