FireBrick wrote:
> Not sure this is documented and I found it by accident.
> I run DXB and MMTTY simultaneously.
>
> But obviously clicking on a cluster spot does not put the Callsign
> into the Call Field of MMTTY.
> Hence the buffers won't pick it up unless you manually type it in.
>
> Just by chance, I clicked on the DX Call in the DX Info window.
> The field is then surrounded by a outline. use keystroke Ctrl C and
> then mouse to the Call Field of MMTY and right click/paste.
> Viola...no typing and no mistakes....
>
> I can't do a Copy of a call I manually enter into MMTTY and paste it
> into the Callsign field of the DXB QSO log though. Ctrl V doesn't work
> either...
>
>
> I can't copy/paste a rst from MMTTY into the RST field of DXB
>
> BUT!
>
> I CAN copy/paste a name from the MMTTY Name Field into the Name Field
> of DXB...
> I CAN copy/paste a QSL MANAGER callsign from MMTTY into the Manager
> field of QSL Info window.
>
>
> Curious if other can duplicate this.
> Running XP Pro/SP2 on a 3200 Athlon.
>
> Bill H. in Chicagoland
I run HamScope 1.54 (which usesd the MMTTY engine) and I can cut 'n
paste just like you describe. Cool tool. Thanks for sharing it.
Jim, K8FT
From [EMAIL PROTECTED] Fri Oct 29 17:32:09 2004
From: [EMAIL PROTECTED] (WA9YSD)
Date: Fri Oct 29 17:34:11 2004
Subject: [Dxbase] Re: CH7SV JA or VE ?
Message-ID: <[EMAIL PROTECTED]>
Thanks to all who helped. Looks like RF got the program wako and went to JA.
After I rebooted the computer VE shows up just like it should have.
Thanks again.
Jim
From [EMAIL PROTECTED] Fri Oct 29 21:12:36 2004
From: [EMAIL PROTECTED] (Art Searle W2NRA)
Date: Fri Oct 29 21:14:42 2004
Subject: [Dxbase] How I setup DXBase & MMTTY w/microHam Keyer!
Message-ID: <[EMAIL PROTECTED]>
Hi Ed,
Ed wrote:
> Art, any chance of you sharing the interface info? I'd really like to give
> this a try.
> I wrote:
>> After a private email exchange with Bill a.k.a. FireBrick I got MMTTY
>> working with DXBase 2005 even with the microHam Keyer USB interface.
>> It's
>> late and I haven't fully tested it but it does seem to be working great.
>>
>> So, bottom line, DXBase 2005 does work with MMTTY if set up right.
>>
>> Thanks Bill,
Sure Ed, but if I'm going to type the whole thing out I'm going to post it
to the DXBase group.
How I set up the microHam Keyer USB interface to use MMTTY and DXBase 2005
at the same time with help from Bill a.k.a. Firebrick:
1. microHam Keyer software port setting and other settings
a. Ports Tab - Radio control = COM3, FSK=COM5, Win Key=COM1, CW=COM4 DTR,
PTT=COM4 RTS, Foot Switch COM4 CTS
(I use Win Key with DXBase and conputer generated CW on COM4 with
WriteLog and Foot Switch I
use as hand switch to key Heil headset mic)
b. PTT/FSK - all settings are default except WinKe PTT = none and
personal choice I've checked Mute
computer CW and Mute computer FSK
2. DXBase Settings
Set up MMTTY to launch in Programs menu
Tools/Options..../Users Options....Radio 1 tab - Comport = COM3,
check Connect HF Radio 1 Serial
Interface
Tools/Options.../CW Options....CW Interface tab - check K1EL Winkey
External Board
Tools/Options.../CW Options....Winkey Options tab - Pin 5 Config =
Tone and Comport = COM1
3. MMTTY setting
Setup MMTTY TX tab PTT Port = COM5
Setup MMTTY TX tab, Radio Control button Port = COM4 (not COM3)
Setup MMTTY Misc tab, TX Port = COM-TxD(FSK)
Setup MMTTY Misc tab, USB Port button, Processing method = C:
Limiting speed
Well I think that's it. This setup does allows me to use DXBase and MMTTY
at the same time. It also does everything I want to do with WriteLog.
Hope this helps. Bill a.k.a. Firebrick, did I forget anything?
73,
Art
W2NRA
