Ron, Just simply edit into your Rptdesc.ini file the following complete entry :::
[Top List Stats] hfnumericstats.rpt B Summary HF Numeric Statistics 2-160 Meters. User selection of including Deleted Entities or 60 Meter stats. *** For right now - just simply edit and paste all of the lines you see above into your Rptdesc.ini file (at the very bottom) --- then see if it runs ok -- Thereafter, since the above lines (all of them) CREATES a complete "folder" within the viewing area of the Standard Reports -- you can (at your own choice) place the above lines further up into the ini file there... Just make very sure that you do not place the above lines "within an existing folder area" -- folder being defined as [Blah Blah Blah] *** Those two line entries create the folder TITLE and show where the "end" of the folder is at ( *** ) 73 Joe wa6axe Ron Stordahl wrote: > Joe...that report is not set up to show in the reports offered in the > standard reports window. At least I can't find it. But it does exist in > the reports folder. > How do you add this so it will be selectable? > > Ron, N5IN > > > Joseph Glockner wrote: > >> Tim, >> >> YES - I made a Standard Report (which is included in your >> 2005) -- go to >> >> Output / Standard Reports / >> >> while in the "Select Standard Report" window - look for the >> file with the filename of >> >> hfnumericstats.rpt >> >> >> In this report, I made it so that you could SEE BOTH >> the RTTY and Digital (Combined - as yuo saw before) - OR - >> separate -- all in one report.. >> >> 73 Joe wa6axe >> >> >> Tim Pearson wrote: >> >>> Help I just upgraded to DXBase 2005 and now when I do a Output HF >>> Numeric >>> Statistic/Countries >>> I no longer get an accurate DXCC total for RTTY. DXB now separates RTTY >>> from Digital :-( >>> >>> The ARRL does NOT keep track of Digital and RTTY countries separately >>> (PSK = >>> RTTY, All Digital = RTTY). For some reason DXB 2005 has separated >>> RTTY and >>> PSK statistics and I don't like >>> this and would like them combined. The ONLY award I know of that >>> differentiates is the >>> CQ-WAZ. >>> >>> Any way to get accurate DXCC-RTTY(&PSK) country count? or do I have >>> to go >>> back to 2004? >>> >>> Thanks! >>> >>> Tim-KU4J >>> >>> ______________________________________________________________ >>> Dxbase mailing list >>> Home: http://mailman.qth.net/mailman/listinfo/dxbase >>> Help: http://mailman.qth.net/mmfaq.htm >>> Post: mailto:[email protected] >>> >> ______________________________________________________________ >> Dxbase mailing list >> Home: http://mailman.qth.net/mailman/listinfo/dxbase >> Help: http://mailman.qth.net/mmfaq.htm >> Post: mailto:[email protected] > > > > ______________________________________________________________ > Dxbase mailing list > Home: http://mailman.qth.net/mailman/listinfo/dxbase > Help: http://mailman.qth.net/mmfaq.htm > Post: mailto:[email protected] > From [EMAIL PROTECTED] Tue Jan 18 20:30:10 2005 From: [EMAIL PROTECTED] (jim) Date: Tue Jan 18 20:35:30 2005 Subject: [Dxbase] i/p host file Message-ID: <[EMAIL PROTECTED]> lost ip host file.can see it in windows and dxbase but cannont get any listings..under options reads could not open pktcmds.tex,in dxbase screen undermodify host file get msg unable to locate or open host file . any ideas??? Jim From [EMAIL PROTECTED] Tue Jan 18 22:25:45 2005 From: [EMAIL PROTECTED] (Jack) Date: Tue Jan 18 22:31:12 2005 Subject: [Dxbase] i/p host file References: <[EMAIL PROTECTED]> Message-ID: <[EMAIL PROTECTED]> Jim, Sounds like you have installed some software that has overwritten the host file that we installed which contains all the IP listings. There is another copy of the hosts file that we use in your DXbase folder. You can copy this to where it is supposed to be on your OS. See the help file for info on where it is supposed to be for your OS, or just search for the file and you can find the proper location that way. Regards, Jack ----- Original Message ----- From: "jim" <[EMAIL PROTECTED]> To: <[email protected]> Sent: Tuesday, January 18, 2005 8:30 PM Subject: [Dxbase] i/p host file lost ip host file.can see it in windows and dxbase but cannont get any listings..under options reads could not open pktcmds.tex,in dxbase screen undermodify host file get msg unable to locate or open host file . any ideas??? Jim ______________________________________________________________ Dxbase mailing list Home: http://mailman.qth.net/mailman/listinfo/dxbase Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected]
