Josh helped me get going and maybe I can return the favor by helping you. Here is what Josh sent me. It involved editing the radio.ini file for the 746 (not pro)
----------------- > For radio 1, I have Icom 746 set. > > Com 1 9600 8 word length none parity and 1 stop bit > > I also have RTS High checked because my cable uses RTS for power. > > In your RADIO.INI file for dx base, you need to change the address of the > radio to Address=0x66 because the 746 and 746 pro use different > addresses... > -------------- Charlie Ham Radio - AD5TH www.ad5th.com Live Blues Music www.492acousticblues.com ----- Original Message ----- From: "Milos Rankovic" <[EMAIL PROTECTED]> To: <[email protected]> Sent: Wednesday, March 02, 2005 9:33 PM Subject: [Dxbase] Interfacing IC746pro > Hello guys, > > I am trying to establish communication between 746pro and DXbase (2003) > but without success. If I use other program, like Commander it works > great. I set same parameters in Dxbase (speed, start/stop bits.) but > nothing. Any suggestion would be more than helpful. > > 73, Milos > > > ______________________________________________________________ > Dxbase mailing list > Home: http://mailman.qth.net/mailman/listinfo/dxbase > Help: http://mailman.qth.net/mmfaq.htm > Post: mailto:[email protected]
