Now the only program that I have trouble with is DXBase 2006 when clicking a dx station on the cluster DXBase band switches the radio but not the Steppir Control until you click it a 2nd time. It's always one behind switching the steppir..switches the rig to the proper frequency every time.
_____ From: Jim [mailto:[EMAIL PROTECTED] Sent: Monday, April 24, 2006 5:35 PM To: '[EMAIL PROTECTED]' Subject: RE: [SteppIR] Orion II and SteppIR Controller Interface Tracking You have to change bands with a radio control program verses the front panel on the Orion, assuming you have the Y cable configured correctly. Programs such as N4PY, Commander, and Ham Radio Deluxe etc. work fine. Now the only program that I have trouble with is DXBase 2006 when clicking a dx station on the cluster DXBase band switches the radio but not the Steppir Control until you click it a 2nd time. It's always one behind switching the steppir..switches the rig to the proper frequency every time. Jim _____ From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of James C Samuels Sent: Monday, April 24, 2006 4:23 PM To: [EMAIL PROTECTED] Subject: [SteppIR] Orion II and SteppIR Controller Interface Tracking This past weekend I installed my new BiggIR Vertical, but for the life of me I can not get the controller to track my Orion II. Using the WYE cable, with ORION and 57800 baud selected in the transceiver set-up menu and in general freq mode - nothing. Has anyone had success getting the SteppIR Controller to track the Orion II or am I just missing something very obvious - which is probably the case? Thank you. Jim, W3BG
