Providing the protocol for your radio is published there really should be no problem whatsoever adding your radio to DXbase.
Dxbase uses a file called radios.ini to store the settings for each radio, it's pretty easy to add new radios to this file, I'll gladly assist but I will need full details of the serial protocols used by the un-supported radio and would ask that any new additions be tested in full. I have done the elecraft k2 support (and looking forwards to doing the Elecraft k3 Support!) and have helped a bit with some of the Icom support Does the FT2000 currently work ok and if so what radio selection 'works' are there any missing / broken features or other weirdness that needs correcting The Omni 7 is a non worker currently? Is the protocol published ? 73 Brendan Ei6IZ On Sat, 2007-09-01 at 16:13 -0400, Dave Blake wrote: > Bill I'm in the same boat only a different radio. I have > had a Ten Tec Omni 7 since March and none of the existing > radio files work. I contacted Jack months ago in hopes > that he would address the problem. I'm still waiting. > > I am a 11 year veteran user of DXB and really don't want > to switch. > > 73 > Dave -N4DB- > > -----Original Message----- > From: [EMAIL PROTECTED] > [mailto:[EMAIL PROTECTED] On Behalf Of Bill > Parry > Sent: Saturday, September 01, 2007 3:39 PM > To: [email protected] > Subject: [Dxbase] DXBase2007 and FT2000 > > I didn't get any responses last time so I thought I would > try again. > > Does anyone use the Yaesu FT2000 and have it interfaced with > DXBase? If > so, what did you do to get it to work? I am going to > purchase an FT2000 > soon and I am hoping that someone might have solved the > problem. Some of > the other software providers seem to have the proper > software built into > their programs by this time, usually by making small mods to > their > FT9000 interface but there is no FT9000 interface either. > > Bill, W5VX > > ____________________________________________________________ > __ > Dxbase mailing list > Home: http://mailman.qth.net/mailman/listinfo/dxbase > Help: http://mailman.qth.net/mmfaq.htm > Post: mailto:[email protected] > > ______________________________________________________________ > Dxbase mailing list > Home: http://mailman.qth.net/mailman/listinfo/dxbase > Help: http://mailman.qth.net/mmfaq.htm > Post: mailto:[email protected]
