double check.. com 1 may be for an internal modem!
----- Original Message ----- From: "Al Bailey" <k8...@comcast.net> To: <dxbase@mailman.qth.net> Sent: Sunday, May 10, 2009 11:33 PM Subject: [Dxbase] Port problems.. >I recently had a mother board go belly up so was forced to upgrade my > PC. I now have a Dual Core system with 4 gig of ram but have > encountered a problem with the new mother board. It does NOT have ANY > serial ports. > > I thought this would not present a problem as I have a Byte Runner > PCI to 8 port serial card. There is one Com port on the system board > but no cable to the rear nor any place to put a DB9 so I deactivated > it so it is not seen. I then configured my Byte Runner to see Com 1 > thru Com 8.. Here is what I have connected so far. > > Com 1=FT1000MP > Com 2=TS2000X > Com 3=W5XC Keyer > Com 4=Rigblaster > Com 5=Alpha 87 > > I can get the FT1000MP to work with no problem on Com 1 but when I > click the icon to switch to Com 2 it still controls the FT1000MP but > should control the TS2000X. > > I looked in my INI file and it seems OK so I am lost at this point. > > Anybody have any ideas? I am running XP Pro SP3 for the record. > > Any help will certainly be appreciated. Thanks and 73 de K8SIX > > BTW Byte Runner was bought out by VSCom > > ______________________________________________________________ > Dxbase mailing list > Home: http://mailman.qth.net/mailman/listinfo/dxbase > Help: http://mailman.qth.net/mmfaq.htm > Post: mailto:Dxbase@mailman.qth.net > > This list hosted by: http://www.qsl.net > Please help support this email list: http://www.qsl.net/donate.html ______________________________________________________________ Dxbase mailing list Home: http://mailman.qth.net/mailman/listinfo/dxbase Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Dxbase@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
