Thanks Joe. I had the green lights OK, just didn't have the link established. Seems to work now, although it took a bit to figure out that I needed to 'push' the QSO button twice to complete the transfer.
73, Wes , Joe Glockner wrote: > Wes, > > To USE MMD60 (which is a BRIDGE program) - and have it > LOG into DXbase - you simply go into the MMVARI program's > Option / Setup Logging ... / Conversion (TAB) > > and look to the far right and make a checkmark next > to Link (Turbo HamLOG/Win) ... that selection (checkmark) > is all that is necessary .. > > Now, bring up MMD60 program - then bring up MMVARI - then > bring up DXbase ... your MMD60 program should have GREEN > lights for the acknowledgement that the BRIDGE is made ... > > YOU can now log directory into DXbase ... > > This same procedure is used on > > MMTTY, MMVARI and MMSSTV > > 73 Joe wa6axe > > > ______________________________________________________________ Dxbase mailing list Home: http://mailman.qth.net/mailman/listinfo/dxbase Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Dxbase@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
