I've just downloaded and configured Joe's AXETTY program for use with DXB2006. After a couple of minor glitches everything seems to be running well. I can receive and copy RTTY off the air and can transmit FSK with the Microkeyer II and get a test QSO from AXETTY to load into DXB. The only problem I can't seem to resolve is the frequency field in AXETTY is not picking up the radio frequency. Thus when I log a QSO from AXETTY to DXB the frequency info is missing. I've cleared the check box in AXETTY General Settings to send the frequency to the logger, but the problem is there is no frequency info being read from the radio to send to the logger.
I had a similar problem when first setting up MMTTY - no frequency being displayed in MMTTY. With help from Joe, W4TV, I was able to get the frequency readout in MMTTY to work by configuring Com7 in the router to 2nd CAT and then setting Com7 as the Port in the MMTTY TX/Radio Command button. I am using the MMTTY router configuration with AXETTY and as noted everything works except getting the radio frequency into AXETTY. Is anyone out there using AXETTY with the Microham router that is getting the frequency info to display correctly? If so, what is the secret? 73, Gary AL9A ______________________________________________________________ Dxbase mailing list Home: http://mailman.qth.net/mailman/listinfo/dxbase Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
