I've been using DXB2007 since it was released with few problems and most of them were pilot error. I just noticed some strange behavior with the Summary window. I'm not sure if it's a bug or if I have a file corrupted causing the problem.
Here's what's happening - In the Summary window with the VHF-GRIDS category selected I noticed the SPath and LPath headings are displayed without tenths of degrees, unlike other categories, except CQ-Zones, that display tenths of degrees. When I mouse click on the SPath or LPath values to turn the rotor the rotor either doesn't turn or turns to the wrong heading. Other categories all seem to work as expected. Rotor settings are, type HYG-DCU1, initialize AP1, turn rotor # ; AM1; , stop rotor AS1; , Character is selected, Use leading zeros in degrees is checked, Use delay is not checked. The rotor interface is an Idiom Press to a Yaesu G-2800DXA. Is anyone else seeing any similar behavior? If this is likely due to a corrupted program file any ideas which file? ( I really don't want to reinstall DXB and find it still happens if I can avoid it!) 73, Dale AA1QD ______________________________________________________________ Dxbase mailing list Home: http://mailman.qth.net/mailman/listinfo/dxbase Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
