just my 2 cents, but this sound more like shielding issues on the current computer, not the softwares problem.....
It may actually be getting in via the keyboard, or mouse, whther they are wireless or not, cable acting as an antenna. simulates a keystoke, or other strange stuff. I have had this similar issue back on the old ts440, using only an mc60 deskmike. got rid of the deskmike, went to a shure 444, or heil (forget now which) and my problem disappeared. again, just my 2 cents, change can be given via paypal Dave Garber VE3IE/VE3WEJ ----- Original Message ----- From: "Jim WA9YSD" <[email protected]> To: <[email protected]> Sent: Friday, September 10, 2010 3:35 PM Subject: [Dxbase] DXBase Useage > Hi all > > Neal do you think this is OK to post on the DXBase reflector? Please look > it > over. You think it is time? > > I am your basic user. > > Many things on the program I have not used for various reasons. > > I just want to put in my log entries. The thrill of doing a contest and > using > DXBase as a contest logging program works well for what little I use to > use it > for. I miss doing that. > > I had made my own program using what was in DXBase and make a report for > the > WQP. Worked well. > > CW, RTTY, and any Digital mode and interface from the program to the > radio, I > had never used these features. Between the computer and radio while > running > 1KW > gave me grief and caused me issues with the logging program. It did not > matter > what program I ran, I had same issues. Interesting enough, with each > program I > ran, different parts of the program was interfered with. The location > when > going from one program to another changed. Oddly enough, the damage done, > all > ways happened in the same location when the same program was running. > > Having the Radio controlled by the computer to change freq., is another > one of > my issues caused by RFI and high power. 200 watts or less it runs well. > > Even keeping the CPU and Radio equipment separated with no connection I > had > RFI issues with 1KW. > > Looks like a K3, K1 or a Flex radio is the best way to go cause they have > a > minimal path for RF to fly back on. The flex radio only has a single USB > cable > to go between the radio and computer. Oh, and the AC power line. > > Because of the RFI issue and it was messing up my DXBase logging program, > It > was > very hard to make corrections and diagnose what was affected. A couple of > Joe's > Crystal programs helped but it was too time consuming for me cause I had > over > 16000 log entries to go through. A couple of other times I had to reload > the > DXBase program and import my ADIF's. Sure glad Joe had taught me to do a > back > up. > > RFI is for the most part has been eliminated, with the use of Blue Tooth > key > board > and mouse. > > > I have used about 10 of Joe's Crystal report programs. A couple of them > I really liked. > > QSL label function I did not use for various reasons. Some day I might > try it > again. > > With companies that you send your ADIF to and they send cards out for you, > the > cost of ding it your self, for cards postage and the sort, you basically > break > even. Send them direct with this service is good but the return is very > low > cause they do not add the needed Green Stamps that make the difference. > My > guess is that you can save money if you do it your self. > > Propagation and MUF is a key to good DXing. I would like to see this > improved. > There are better ways of doing this. i did not like the add on programs > that > DXBase used. I had issue with Keys and Registrations when I updated them > to a > new computer, and found it to be a pain in the butt over the years. > > Re-Registration was a pain when I had to put the program back on my > computer > after repairs or replacement of a computer or RFI got into it so bad that > I had > to reinstall DXBase. Sure glad that Joe was a lot of help cause he had > sent me > my registration info several times. > > Some problems filtered over from DXBase 2003 to 2007. Hard to tell > weather the > problems was with the program or RFI, no way to verify. There was a gut > feeling > after doing some home work and research. It could even had been issues > with > Windows and its conflicts. After all the RFI work that I had done > too the station, it would be interesting to try DXBase 2007 again. > > I like Mac and what it does. Nice smooth running machine. I am very > patient > for the possibility that a Mac version of DXBase would be worked on. > > Emulators to run Windows and DXBase on the Mac is out of the question. > The > whole windows program bogs down with the emulator. I would try DXBase > with just an emulator, but what good is that with out windows running as > well. > > > Stay on course, fight a good fight, and keep the faith. Jim K9TF/WA9YSD > > > > > ______________________________________________________________ > Dxbase mailing list > Home: http://mailman.qth.net/mailman/listinfo/dxbase > Help: http://mailman.qth.net/mmfaq.htm > Post: mailto:[email protected] > > This list hosted by: http://www.qsl.net > Please help support this email list: http://www.qsl.net/donate.html ______________________________________________________________ Dxbase mailing list Home: http://mailman.qth.net/mailman/listinfo/dxbase Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
