Dick, It's a two step process. First use the Selection Wizard (Tools/Selection Wizard or the icon on your tool bar), to select the begin and end dates of the log you want to print out. When you open the Wizard click on the QSO Filters button. Clear all the check boxes on the filters window. Then check the "QSO Date <" and "QSO Date >" boxes and set the dates you need to establish the start and end dates and click OK. Now from the Selection Wizard main window set "Output Type" to Reports. You may want to check the "Test only..." box and do a trial run first to see if the number of records selected seems reasonable. If not, to back to the QSO Filters window and check your settings. If it looks good uncheck the test box and run it again. This will put a copy of the records you want in a special area of DXBase. Exit the Selection Wizard.
Now you will print the log list of the records you just selected. Go to Output/User Designed Lists. A small window titled "User List Record Source" opens. Check the "Sort Order" you want, probably the default of Date, and make sure the "Data Source" is set to "Wizard Data". Now a window opens with a list of all the pre-formatted Reports available within DXBase. Scroll down through the list until you find a log book style report such as "Log in ARRL Paper Format.lst" or Logbook.lst". There are several possibilites that will probably meet your needs. Click one and then click Open. On the printing options window select Preview in the "Direct to..." box and then Start. A preview of what the report will look like displays. If not to your liking go back and select a different report list. When you get the one you want click on one of the printer buttons at the top of page. Ta da, done! 73, Gary AL9A ----- Original Message ----- From: "Richard Solomon" <[email protected]> To: "DXBase Reflector" <[email protected]> Sent: December 05, 2010 7:16 AM Subject: [Dxbase] Print Out Log Section >I need to print out a section of my log (say the last few weeks). > I have never done this before, but I am, sure there must be a way. > > Can anyone provide some pointers on how to do this ? > > Thanks, Dick, W1KSZ > ______________________________________________________________ > Dxbase mailing list > Home: http://mailman.qth.net/mailman/listinfo/dxbase > Help: http://mailman.qth.net/mmfaq.htm > Post: mailto:[email protected] > > This list hosted by: http://www.qsl.net > Please help support this email list: http://www.qsl.net/donate.html ______________________________________________________________ Dxbase mailing list Home: http://mailman.qth.net/mailman/listinfo/dxbase Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
