Hi Glenn Should work fine but you have to type the date in first. If you type the call in first and tab to another field, DXB will assign the current prefix to it and will not correct it when you enter the date. Be sure to do the date, then call and it will work fine! 73 Neal Campbell Abroham Neal Software www.abrohamnealsoftware.com (540) 645 5394
On Tue, Dec 14, 2010 at 8:02 AM, Glenn Lowery <[email protected]> wrote: > It would be interesting to see the results of the following concerning > K4YR's > situation: > > Copy the QSO data for say the single PJ4I contact on a sticky, then delete > that > one QSO record all together itself, then RELOAD the exact same QSO data and > see > what the program "auto recognizes" the entity to be. > > I myself have not run the updater...but, I'm getting ready to. Mine will > be > somewhat different, since I have NOT loaded any QSOs into DXbase 2007 since > 8 > October. Everything I worked after 8 October was manually listed elsewhere > while awaiting the updater. Yes, it's quite a lot of Q's, but, I also > wanted to > give Neal and the beta testers time to work out all the bugs. > > After I run the updater (over the coming weekend) and start loading in all > the > new PJs and other contacts, I'll be able to report any misidentifications > immediately upon hitting tab after each callsign. And this method is no > longer/time comsumin than any other, since we all had to "type" in the QSO > records at some point :-) > > 73 - Glenn, K2FF > > > > > ________________________________ > From: Pat Parrish <[email protected]> > To: [email protected] > Sent: Mon, December 13, 2010 6:45:18 PM > Subject: [Dxbase] PJs > > Neal > I logged something over 75 new PJs for bands/modes. The Updater failed to > correctly assign correct status to 4 PJ2Ts, 1 PJ2/W5MPC and 1 PJ4I. All > other > Qs with each call & all others are correctly recognized. I have been > unable to > see any logged differences in the 6 noted. It's been so long since I > manually > corrected DXCC status with DXBase 2007 log that I've forgotten the > procedure and > have been unable to do so manually. Any help, please? Thanks > K4YR > ______________________________________________________________ > Dxbase mailing list > Home: http://mailman.qth.net/mailman/listinfo/dxbase > Help: http://mailman.qth.net/mmfaq.htm > Post: mailto:[email protected] > > This list hosted by: http://www.qsl.net > Please help support this email list: http://www.qsl.net/donate.html > > > > > ______________________________________________________________ > Dxbase mailing list > Home: http://mailman.qth.net/mailman/listinfo/dxbase > Help: http://mailman.qth.net/mmfaq.htm > Post: mailto:[email protected] > > This list hosted by: http://www.qsl.net > Please help support this email list: http://www.qsl.net/donate.html > ______________________________________________________________ Dxbase mailing list Home: http://mailman.qth.net/mailman/listinfo/dxbase Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
