What operating system is on your PC? I had a world of problems getting my Win 7 Professional 64 bit machine to talk to the 480. The are some issues with certain USB to serial adapters. You also have to set menu option 56 for com port speed to match your software.
-----Original Message----- From: [email protected] [mailto:[email protected]] On Behalf Of [email protected] Sent: Friday, November 11, 2011 9:38 AM To: [email protected] Subject: [Dxbase] Dxbase with my Kenwood TS-480 Now that I have determined the Piexx board in my TS-940 is not working properly (maybe), I have hooked up my TS-480 and still have trouble with settings. WOW never had trouble when computers had serial ports! Drivers were installed for the cable (usb to serial) and device manager says its working. I set port settings as follows for the TS-480: Baud 4800 data 8 parity none stop bits 1 also tried 2 Have tried with all combonations of DTR, RTS CTS settings Have lso tried another program HR Deluxe that I have used before to get connections (using auto detect. Still cant connect. Bob WB2UBW ______________________________________________________________ Dxbase mailing list Home: http://mailman.qth.net/mailman/listinfo/dxbase Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html ______________________________________________________________ Dxbase mailing list Home: http://mailman.qth.net/mailman/listinfo/dxbase Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
