Joe, Ok, I tried being more patient, not exactly my strong suit, and it finally worked. No speed demon, but it eventually gets there. In my case your report took 4:47 to read the 86,602 records and another 3:30 for the report pages to show up. I jumped to the end of the report, which took several more minutes to process, and discovered it produced 17,539 pages. Don't think I'll be printing it out anytime soon!
I know Neal is busy with V10 and hopefully this new feature will be easier to accommodate in the new release. It would be nice if the Wizard could be used to select just the records that are flagged in the Award column for DXCC and then crunch just those records to set the Verified indicator. It would produce a much smaller report that could then be merged with the existing records in Club Log and those changed indicators would replace the old ones, rather than having to upload the entire mdb log file. BTW, my reading of Michael's announcement leads me to believe that he can handle both <QSL_RCVD> and <LOTW_QSL_RCVD>. I wrote to him seeking clarification and see on the Club Log reflector you did the same. We should have the verdict shortly. Thanks again for all your efforts Joe. It is appreciated by all of us dedicated DXB users. In case I forget, have a most Merry Christmas this year. 73, Gary AL9A ----- Original Message ----- From: Joe WA6AXE To: [email protected] ; [email protected] Sent: December 10, 2012 4:10 PM Subject: RE: [Dxbase] Support for QSL state "Verified" -- REPORT to make adi file for Club Log - WA6AXE Gary, I am running (right now) your own AL9A.mdb file that is from Dec 2011 - it has 69,254 QSOs in it ... YES - the report DOES run slow ... but, if you are patient, it will finish .. ONCE the report is finished going thru the processing of the QSOs -- then it has to FORMAT each page of the report -- THAT does take time - since you logbook is very big ... just wait for the report itself to come into view. There never has been a SIZE problem with any of the reports. The CLUBLOG people (themself) ONLY said about the QSL_RCVD adif field .. So, THEIR OWN software is right now ONLY able to handle QSL_RCVD with the " V " ... OK -- YOUR AL9A.mdb logbook's 69,233 QSO -- "just" finished ... so, it WILL TAKE a few minutes for your CURRENT logbook to run -- just be patient and it will be there for you .. Your 69,233 QSO logbook takes up 14,511 PAGES that makes the full report !!! It will be OK though Gary. 73 Joe wa6axe ------------------------------------------------------------------------------ To: [email protected]; [email protected] From: [email protected] Date: Mon, 10 Dec 2012 15:27:48 -0900 Subject: Re: [Dxbase] Support for QSL state "Verified" -- REPORT to make adi file for Club Log - WA6AXE Joe, Thanks for getting involved so quickly with fix for the verified indicator. I was unaware that there already was an adiexportClubLog report in my 2007 Standard Reports section. I just downloaded the new report and txt file and updated my files. Unfortunately, I cannot seem to get the output to work. The report chunks along for a considerable time reading the 86,600 records in my mdb file, but then when it gets done it just seems to hang there and no report details are displayed. The header line with the print and email icons remains grayed out too. If I click on the report page the whole window goes light gray and the top bar says Not Responding. If I close the window, either with the red X or with Task Manager DXB2007 crashes and shuts down. Did this to me twice. Is there a limit to how many records the report can handle? Or does it take a long time to organize the report after reading the records? I waited what seemed an eternity, probably a minute or so with no response before clicking on the window and causing the crash. Should I just be more patient and wait longer or what? Any advice appreciated. On more thing before I forget. In the adif output file from DXB there are two fields (QSL_RCVD) and (LOTW_QSL_RCVD). Does your new version of this report also handle the (LOTW_QSL_RCVD) situation? I would hope so as I probably have more validated QSLs via LOTW than with cards. If the report is only catching card validated QSLs many of mine will be missed. Thanks again. 73, Gary AL9A ----- Original Message ----- From: "Joe WA6AXE" <[email protected]> To: <[email protected]>; <[email protected]> Sent: December 10, 2012 4:50 AM Subject: [Dxbase] Support for QSL state "Verified" -- REPORT to make adi file for Club Log - WA6AXE > > I have made an update to my DXbase Standard Style report that is entitled: > > adiexportClubLog.rpt > > If you have the AWARD column (for the QSO) checkmarked for DXCC and the > QSO was confirmed via a QSL CARD, my report will make the > QSL_RCVD entry with a V for Verified. > > If anyone wants to use this REPORT, it can be downloaded from: > > > http://www.navycthistory.com/wa6axe/adiexportClubLog.html > > > > 73 Joe wa6axe > > > __________________________________________________________ > Dxbase mailing list > Home: http://mailman.qth.net/mailman/listinfo/dxbase > Help: http://mailman.qth.net/mmfaq.htm > Post: mailto:[email protected] > > This list hosted by: http://www.qsl.net > Please help support this email list: http://www.qsl.net/donate.html > > > ----- > No virus found in this message. > Checked by AVG - www.avg.com > Version: 2013.0.2805 / Virus Database: 2634/5946 - Release Date: 12/08/12 > __._,_.___Reply via web post Reply to sender Reply to group Start a New Topic Messages in this topic (7) Recent Activity: Visit Your Group Switch to: Text-Only, Daily Digest • Unsubscribe • Terms of Use • Send us Feedback . __,_._,___ No virus found in this message. Checked by AVG - www.avg.com Version: 2013.0.2805 / Virus Database: 2634/5946 - Release Date: 12/08/12 ______________________________________________________________ Dxbase mailing list Home: http://mailman.qth.net/mailman/listinfo/dxbase Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
