----- Forwarded Message ----- From: [email protected] To: [email protected] Sent: Friday, January 11, 2013 1:42:00 PM Subject: Re: [dxbase] DX Base won't read from radio
- I have a friend that his proiii is doing the same thing. It will qsy on an internet spot and if you log that spot from the spot window its ok. If you log manually a contact then look at the radio data ie band and frequency its wrong. I suspect the cat cable from the computer to the rig. He is bringing his cable over tomorrow and i will try it on my rig DAVE N8DC ---- Original Message ----- From: Peter W2IRT <[email protected]> To: [email protected] Sent: Fri, 11 Jan 2013 18:10:50 -0000 (UTC) Subject: [dxbase] DX Base won't read from radio Hi all, Within the last two days my copy of DX Base 1.10 has been unable to read frequency and mode data from the radio (by way of Microham's Router software). I have tried every combination of RTS, DTR and CTS and nothing's worked. The com port is set correctly as are the baudrate and all other settings. Nothing changed anywhere (either in Router or DX Base), but this has just stopped. I *CAN* command the radio from DX Base by clicking on a spot-I just can't poll the radio. It's not a problem on the Router end, as N1MM and DX Lab Suite are both operating fine. It's definitely a DX Base problem but I have NO idea where to start troubleshooting here. Any thoughts? --------------------------------------------- 73 and Good DX Peter, W2IRT Vice President, North Jersey DX Association DXCC Card Checker Letter O Manager, ARRL Incoming 2nd District QSL bureau ______________________________________________________________ Dxbase mailing list Home: http://mailman.qth.net/mailman/listinfo/dxbase Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
