Bob, I do not do many SPOTS (Internet) -- but, I was now curious about what you were saying --
IF you go to OUTPUT / Packet / Send Internet Spot the window that pops up (Send DX Spot) "will be" auto-filled-in with the VFO FREQ ... BUT -- just sending a SPOT from the "Internet Packet" Toolbar -- will NOT fill-in the freq .. I setup my station a minute ago so that the "Load Band/Mode" from HF transceiver" was CHECKMARKED .. and I turned-on my Radio 1 TRY to do the Output / Packet / Send Internet Spot -- and see if you are doing something that you did many months ago ... 73 Joe > On 8/22/2013 1:09 PM, Bob Morrow wrote: > > I have a question, when I go to put out a spot on the internet, I thought > > the program would look at the radio and read the frequency and fill in the > > spot accordingly. Well that is not happening, do I have something set > > wrong? I thought was working several years ago. > > > > > > > > > > > > > > > > Bob & Carol Morrow > > > > K9MIE > > > > > > > > ______________________________________________________________ > > Dxbase mailing list > > Home: http://mailman.qth.net/mailman/listinfo/dxbase > > Help: http://mailman.qth.net/mmfaq.htm > > Post: mailto:[email protected] > > > > This list hosted by: http://www.qsl.net > > Please help support this email list: http://www.qsl.net/donate.html > > > > ______________________________________________________________ > Dxbase mailing list > Home: http://mailman.qth.net/mailman/listinfo/dxbase > Help: http://mailman.qth.net/mmfaq.htm > Post: mailto:[email protected] > > This list hosted by: http://www.qsl.net > Please help support this email list: http://www.qsl.net/donate.html ______________________________________________________________ Dxbase mailing list Home: http://mailman.qth.net/mailman/listinfo/dxbase Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
