Hi Corey, Please use the tracker on e1000.sf.net.
You may also want to look through the bugs as there have been reports of Tx hangs with some chipsets that may be similar to yours. Thanks, Emil -----Original Message----- From: Corey Wright [mailto:undefi...@pobox.com] Sent: Monday, January 26, 2009 8:19 AM To: e1000-devel@lists.sourceforge.net Subject: [E1000-devel] recommended reporting/resolution method intel developers, what's the recommend procedure for getting assistance with a "Intel Corporation 82540EM Gigabit Ethernet Controller [8086:100e] (rev 02)" that inevitably, eventually reports "e1000: eth1: e1000_clean_tx_irq: Detected Tx Unit Hang" and stops functioning using 7.3.20-k2-NAPI (from debian's 2.6.26 kernel package), 8.0.6-NAPI, and 8.0.6-stepfix-NAPI (with TxDescriptorStep=4)? mailing list? bug tracker? irc? i don't know if mailing a bunch of attachments (eg lspci, dmesg) to the list is recommended or if there's already enough similar bug reports in the bug tracker to avoid making another one. please advise. thanks for the excellent hardware and driver (as this nic model runs perfectly in two other computers)! corey -- undefi...@pobox.com ------------------------------------------------------------------------------ This SF.net email is sponsored by: SourcForge Community SourceForge wants to tell your story. http://p.sf.net/sfu/sf-spreadtheword _______________________________________________ E1000-devel mailing list E1000-devel@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/e1000-devel ------------------------------------------------------------------------------ This SF.net email is sponsored by: SourcForge Community SourceForge wants to tell your story. http://p.sf.net/sfu/sf-spreadtheword _______________________________________________ E1000-devel mailing list E1000-devel@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/e1000-devel