On Fri, 13 Mar 2009, Ben Greear wrote: > I have selected build-firmware-into-kernel > but it seems e100 is still unhappy in 2.6.29-rc7. > > e100 0000:02:01.0: firmware: requesting e100/d102e_ucode.bin > e100: eth4: e100_request_firmware: Failed to load firmware > "e100/d102e_ucode.bin": -2
can you post anything extra about your config? arch? full dmesg? full .config? There have been several other reports of this but setting CONFIG_FIRMWARE_IN_KERNEL=y seems to fix them in general. also please post lspci -vvv -s 2:1.0, after failing to load. I'm curious if the device might be in D3 still. you can likely just get working by commenting out the firmware load for e100. It may or may not re-enable a hardware bug depending upon the hardware you have. Jesse ------------------------------------------------------------------------------ Apps built with the Adobe(R) Flex(R) framework and Flex Builder(TM) are powering Web 2.0 with engaging, cross-platform capabilities. Quickly and easily build your RIAs with Flex Builder, the Eclipse(TM)based development software that enables intelligent coding and step-through debugging. Download the free 60 day trial. http://p.sf.net/sfu/www-adobe-com _______________________________________________ E1000-devel mailing list E1000-devel@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/e1000-devel
