Hello
WOL with the e1000e driver and the Intel Gigabit CT Desktop Adapter don't work.
lspci shows this:
03:00.0 Ethernet controller: Intel Corporation 82574L Gigabit Network Connection
/proc/acpi/wakeup this:
Device S-state Status Sysfs node
P0P2 S4 disabled pci:0000:00:01.0
P0P1 S4 disabled pci:0000:00:1e.0
UAR1 S4 disabled pnp:00:06
PS2K S4 disabled pnp:00:0c
EUSB S4 disabled pci:0000:00:1d.7
USBE S4 disabled pci:0000:00:1a.7
P0P4 S4 disabled pci:0000:00:1c.0
P0P5 S4 disabled
P0P6 S4 disabled
P0P7 S4 disabled
P0P8 S4 disabled pci:0000:00:1c.4
P0P9 S4 disabled
USB0 S4 disabled pci:0000:00:1d.0
USB1 S4 disabled pci:0000:00:1d.1
USB2 S4 disabled pci:0000:00:1d.2
USB3 S4 disabled
USB4 S4 disabled pci:0000:00:1a.0
USB5 S4 disabled pci:0000:00:1a.1
ethtool eth0:
Settings for eth0:
Supported ports: [ TP ]
Supported link modes: 10baseT/Half 10baseT/Full
100baseT/Half 100baseT/Full
1000baseT/Full
Supports auto-negotiation: Yes
Advertised link modes: 10baseT/Half 10baseT/Full
100baseT/Half 100baseT/Full
1000baseT/Full
Advertised auto-negotiation: Yes
Speed: 100Mb/s
Duplex: Full
Port: Twisted Pair
PHYAD: 1
Transceiver: internal
Auto-negotiation: on
Supports Wake-on: pumbag
Wake-on: g
Current message level: 0x00000001 (1)
Link detected: yes
I don't see my Network Adapter in /proc/acpi/wakup.
When I shutdown my PC the Led on the Networkadapter is off.
But when I unplug my Computer it works.
The problem exists only when I load the driver, when I shutdown the PC without
loading the driver I can wakeup with MagicPacket.
Please help I need WOL
Thanks Thomas
------------------------------------------------------------------------------
_______________________________________________
E1000-devel mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/e1000-devel
