The attachment didn't make it. It was only a single of "----". Please try to send it again.
Thanks. Cheers, John ----------------------------------------------------------- "...that your people will judge you on what you can build, not what you destroy.", B. Obama, 2009 >-----Original Message----- >From: zsolt foldvari [mailto:[email protected]] >Sent: Wednesday, April 01, 2009 3:48 AM >To: Brandeburg, Jesse >Cc: [email protected]; Tantilov, Emil S >Subject: Re: [E1000-devel] Tx Unit Hang on 82540EP > >On Wed, Apr 1, 2009 at 12:06 AM, Brandeburg, Jesse ><[email protected]> wrote: >> can you try turning off TSO? >> >> ethtool -K eth0 tso off >> >> if that doesn't work try turning off the other offloads too >> >> ethtool -K eth0 tx off rx off sg off >> >> I have a theory about this and other tx hangs being more >likely due to >> some kernel side changes which are resulting in our adapter receiving >> much larger transmit chunks of data to send. > >No change. Please find dmesg output attached. First I turned off TSO, >then I reloaded the module and turned off everything (tso, tx, rx, >sg). > >For your info I'm running 8.0.9 now, which I downloaded from Intel: >$ ethtool -i eth0 >driver: e1000 >version: 8.0.9 >firmware-version: N/A >bus-info: 0000:02:01.0 > >Zsolt > ------------------------------------------------------------------------------ _______________________________________________ E1000-devel mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/e1000-devel
