Nils Faerber wrote: > Ronciak, John wrote: >> This may be kernel problem. Do you have to use one of the new >> kernels for now? Since changing the driver doesn't change things >> this most likely is not a driver problem. > > Well, I do not *have* to. The latest working one for me was 2.6.32. > >> Are you sure nothing else on the network has changed? Like a switch >> or router? Or even a switch configuration change? > > Pretty sure, yes, since I tried this in different setups up to direct > connection with my embedded board. > >> Is spanning tree enabled on your switch? > > Nope - I only have quite dumb pocket switches. > >> Does it go back to working if you go back to an older kernel? > > Yes, 2.6.32 is working nicely.
What speed/duplex are you connected to? Could you provide the output of: ethtool eth0 ethtool -d eth0 Also if you don't mind filing a bug at e1000.sf.net with all the information you provided thus far? Thanks, Emil ------------------------------------------------------------------------------ This SF.net email is sponsored by Make an app they can't live without Enter the BlackBerry Developer Challenge http://p.sf.net/sfu/RIM-dev2dev _______________________________________________ E1000-devel mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/e1000-devel To learn more about Intel® Ethernet, visit http://communities.intel.com/community/wired
